Features:

• Adjustable closing force size range 1-6
• DDA compatible
• Suitable for fire doors
• Optical strength indicator
• Adjustable back check
• Guide rail for smooth action
• E-guide rail for hold open operation
• Adjustable latching action
• All adjustments on front of closer
• Universal fixings (Fig.1, 61 & 66) in one closer

Specifications:
Universal surface mounted rack and pinion door closer with a guide rail for doors up to 1400mm, with adjustable closing force, optical strength indicator, back check, latch action. All valve adjustments on the front of the mechanism.

Electrical installation
The GEZE TS5000E must be connected to a 24 V DC
direct voltage supply to allow the door to be held open.

Function
Voltage applied to E-guide rail = door held open
No voltage applied or switched off door not held open and closes automatically
The door can be closed manually at any time regardless of whether or not voltage is being applied

Electrical data
Operating voltage 24 V DC ±10%
Connected load 100 mA
Max. permissible residual ripple 20%
Rating 100%
Enclosure rating IP 43 (for interior use only)

Connection
The power supply cable (max. cross section 0,8 mm2)
from the fi re detector control unit (24 V DC) is connected
to the connection clamp of the guide rail
Flush-mounted power supply cable

Options:
TS5000 for fitting on the hinge side of the door
TS5000L for fitting to oppersite hinge side of the door
(The hinge side is the side of the door where the knukle of the hinge can be seen when the door is closed)

Quantity Discounts:
These discounts apply to all TS5000E closers and accessories