Monthly Archives: November 2010

Do you supply a 24V door hold open/closer for connection to a fire alarm that can be left open in various positions?

Posted on 29th November 2010 by Editor

Yes, we do supply a door closer which can allow a fire door to be left ajar, or open at any angle, while connected to the fire alarm system – it is called a Geze TS4000 EFS, and you can … Continue reading →

Posted in door closers | Tagged , , , , , | Comments Off on Do you supply a 24V door hold open/closer for connection to a fire alarm that can be left open in various positions?

Doorstuff Approved as Member of Trading Standards’ Buy With Confidence Scheme

Posted on 26th November 2010 by Door Admin

Following a recent Trading Standards Audit performed by Devon County Council, Doorstuff Ltd has been accepted as a member of the Buy With Confidence scheme. The scheme provides consumers with a list of local businesses which have given their commitment … Continue reading →

Posted in Uncategorised | Leave a comment

Is there panic hardware for INWARD opening doors?

Posted on 26th November 2010 by Editor

Q: (from John) We have a fire exit door that opens inward and we require to fit a lock that can only work from inside the building, do they make such a thing? A: The Exidor 500 series can work on … Continue reading →

Posted in panic hardware | Tagged , , , , , , | Comments Off on Is there panic hardware for INWARD opening doors?

Help! Our door closer slams the door

Posted on 24th November 2010 by Editor

…My freeholder has just fitted a door closer at my request as the main door slams when people close it. However, the one they have fitted has not remedied the problem as the door needs to be closed very gently … Continue reading →

Posted in door closers | Tagged , , , , , , , , | Comments Off on Help! Our door closer slams the door

Can the cylinder in an OAD be interchanged?

Posted on 23rd November 2010 by Editor

The Exidor range includes Outside Access Devices (OAD’s) with interchangeable and non-interchangeable cylinders. All the Exidor OAD units, except for the 298 and 409 units, have interchangeable cylinders. The cylinders in the 302 OAD have to be drilled and tapped … Continue reading →

Posted in panic hardware | Tagged , , , , , , , , | Comments Off on Can the cylinder in an OAD be interchanged?

Recommend a wardrobe sliding door kit for my doors?

Posted on 22nd November 2010 by Editor

Q: (from Dennis) I have two doors measuring 6 foot x 21 inches 3/4 inch thick which I want to slide past each other like a in wardrobe on double tracks top and bottom.  They are 15kgs each and 16mm … Continue reading →

Posted in sliding door gear, wardrobe & cupboard doors | Tagged , , , | Comments Off on Recommend a wardrobe sliding door kit for my doors?

I’m currently detailing a sliding door using the Projeto 150 system and was wondering if you have the dimensions of the floor mounted guide for the timber door as it seems to be the only element not dimensioned on the pdf?

Posted on 21st November 2010 by Editor

The door stops for the Projeto 150 are on the track itself, not the floor, and included in the kit.  The dimensions of the floor guides are 19.8mm width x 51mm length x 17mm tall.  You mortice a groove in … Continue reading →

Posted in sliding door gear | Tagged , , , , , | Comments Off on I’m currently detailing a sliding door using the Projeto 150 system and was wondering if you have the dimensions of the floor mounted guide for the timber door as it seems to be the only element not dimensioned on the pdf?

I’m looking for wardrobe sliding door gear with a length of 2900mm to take three doors (MDF) running on two tracks. One door at rear with two at front. Any ideas please?

Posted on 20th November 2010 by Editor

As long as your individual doors are less than 25kg each in weight, then you can choose between the Coburn Jason bottom running wardrobe gear (you’d need to order 2 kits to get the length) or the Coburn Twin 60 … Continue reading →

Posted in sliding door gear, wardrobe & cupboard doors | Tagged , , , , | Comments Off on I’m looking for wardrobe sliding door gear with a length of 2900mm to take three doors (MDF) running on two tracks. One door at rear with two at front. Any ideas please?

We have an Exidor 500 series panic hardware with a red oval door bar we need replacing as the bar lever that attaches to the lock has snapped, is this spare part available?

Posted on 18th November 2010 by Editor

If the lever of the locking unit has broken, then the whole thing can be replaced for the price of the locking unit component.  (If it’s the slave unit, then contact us and we can quote you for a replacement … Continue reading →

Posted in panic hardware | Tagged , , , , , , | Comments Off on We have an Exidor 500 series panic hardware with a red oval door bar we need replacing as the bar lever that attaches to the lock has snapped, is this spare part available?

How do I stop the door closer slamming the door?

Posted on 17th November 2010 by Editor

Q: (from Costa) I have a door fitted with a Geze TS4000E door closer and I dont know how to perform the final slam adjustment. The door is shutting perfectly until the last 10 degrees or so when it just … Continue reading →

Posted in door closers | Tagged , , , , | Comments Off on How do I stop the door closer slamming the door?