Top


Part of Devon Buy with Confidence

No quibble returns

Exidor 306 panic hardware – for when that escape door absolutely has to lock behind you

May 27, 2014 by · Comments Off on Exidor 306 panic hardware – for when that escape door absolutely has to lock behind you 

exidor 306 panic latch mortice operator
The Exidor 306 is a panic hardware push pad actuator unit with a cylinder mortice night latch case that will lock behind you everytime you leave or enter the building through the fire escape.  Each time a user tries to enter they will need to use the key.  This is ideal for buildings where the users are not trusted to lock the door from behind, and this security feature can be augmented by fitting a door closer.  Supplied with or without a Euro profile cylinder.  A mortice plate is also supplied as standard.  The unit provides security on the outside with ease of escape from the inside in emergency situations.

Giant doors can be fire escapes too!

November 11, 2013 by · Comments Off on Giant doors can be fire escapes too! 

exidor-panic-hardware2

With a standard Briton 376 two point locking push bar the maximum door size can be up to 1300mm wide & 2500mm high – anything smaller than this and you just cut the bar or shoot bolt tube down with a hacksaw while fitting.  The standard Exidor 294 two point locking panic bolt will fit doors up to 1220mm wide & 2440mm high, but it your door is even bigger than this, then oversize extras can be purchased as upgrades to the kit: push bars and/or top shoot tubes are available at 1600mm long and at 2100mm long. This means Exidor panic hardware can cater for whopping door leaves up to a maximum 2150mm wide & 3180mm tall.

Bottom