Top


Part of Devon Buy with Confidence

No quibble returns

GEZE Perlan & Rollan glass clamping plates

June 30, 2014 by · Comments Off on GEZE Perlan & Rollan glass clamping plates 

GEZE perlan glass clamp
Focus on the 30mm glass clamping plates which are used to attach the toughened glass to the top hung sliding door gear for both the GEZE Perlan and the Rollan sliding door gear for frameless glass. The glass does not need to be drilled for the clamps. The clamps are suitable for glass of 8mm, 10mm or 12mm thickness and are supplied with short covers to hide the clamp fastenings. The German name for these is nice and easy to transplate:  Glasklemmplatte! Full length clamp covers are also available in two lengths, 950mm and 1450mm. The cover attaches to the 30mm glass clamping plates and provide an asthetically pleasing look across the top of the door with the minimum of effort. When the end of the covers are more than 200mm from the clamps then a set of End Clamps are required to ensure the stability of the covers at either end of the glass.

Q: I would like to fit frameless frosted green glass doors into a recess in my bedroom to create a wardrobe…

January 25, 2011 by · Comments Off on Q: I would like to fit frameless frosted green glass doors into a recess in my bedroom to create a wardrobe… 

…The aperture is 2.75mx1.4m – its a strange half-height recess.  I would like to fit a slider mechanism in to the concrete block at the top and suspend 2 or 3 frameless glass panel doors which slide across each other.  I have a builder who can fit this for me, but might need some advice.
A: If your glass panels are under 80kg each then you can use the Rollan 80G system. You can read all about it on our website at the link in the text.  For 2 panels passing in front of each other you would need 2 x R80.32G kits (although they are 3.2m long you can cut them down).  For 3 panels running on two tracks, you would need one extra door pack, see the components list.  If you need more advice, just give us a ring.

Bottom