Top


Part of Devon Buy with Confidence

No quibble returns

HOPPE AR226 double door selector

April 25, 2014 by · Comments Off on HOPPE AR226 double door selector 

HOPPE AR226 door selector
The HOPPE AR226 door selector enables a pair of self-closing doors with rebated meeting stiles to close in the correct sequence automatically, no matter which door is opened first, thereby maintaining the fire resistant seal.  For use with power size 3-5 door closers, suitable for use on timber doors of any width up to 1220mm, and all standard thicknesses.  Suitable for rebates up to 25mm, successfully type tested (1,000,000 cycles) in accordance with BS EN 1158.

How to change the handing of a HOPPE escape sashlock (AR915)

September 12, 2013 by · Comments Off on How to change the handing of a HOPPE escape sashlock (AR915) 

ar915-handing1. Latch reversibility:  To reverse the latch bolt insert a screw driver through the hole in the back edge of the lock case, push the slotted head forward firmly and rotate.
2. Escape reversibility:  To reverse the escape function remove the follower plate with a small blade, swap it to the other side of the lock case and insert into the follower.

The HOPPE AR910 Architectural Mortice Lock Case

February 23, 2013 by · Comments Off on The HOPPE AR910 Architectural Mortice Lock Case 

hoppe-ar910
Standards and Certification:

Quality & Performance: Successfully type tested to all the requirements of BS
EN 12209: 2003
Manufactured In Europe by an ISO 9000 Registered Company
Fire Safety: Included in a successful fire test to BS EN 1634 Part 1: 2000. For use
on a 1 hour fire door
CE Marked: Certificate: 1121-CPD-AG0067
Certifire Approved Product: Certificate CF530
Conformity Statement: Meets the dimensional recommendations of BS8300 and
Approved Document “M”
Features:
Case – mild steel/black powder coated finish, pierced t • o accept bolt through
furniture and escutcheons with 38mm centres
• Backset – 60mm (other sizes to order)
• Centres – 72mm
• Latchbolt – nickel plated solid brass guided latchbolt, easily reversible without
opening case
• Follower – 8mm zinc alloy follower (high copper content for additional strength)
with spindle gripping feature
Deadbolt – zinc alloy single throw with 20mm projection (high copper content for
additional strength)
• Forend and striking plates available square or radius
• Suitable for sprung and most unsprung lever furniture
• Satin/polished stainless steel or polished brass forend and striking plate
• 5 year guarantee

Bottom