Top


Part of Devon Buy with Confidence

No quibble returns

SAHECO SF-Roller low headroom sliding door kit, with optional Soft Brake

August 21, 2014 by · Comments Off on SAHECO SF-Roller low headroom sliding door kit, with optional Soft Brake 

SAHECO SF Roller

The SAHECO SF-Roller Low Headroom sliding door kit is now in stock – with optional Soft Brake – it uses a clean design track profile with a full length wall mounting bracket giving a very small gap between the door and the track. The bracket, with concealed fixings, provides support to the track whilst maintaining the overall clean crisp profile. Couple this with the low head room door mounting and the SAHECO SF-Roller system provides an completely contained sliding door track without the need for bulky pelmets.

GEZE Perlan & Rollan glass clamping plates

June 30, 2014 by · Comments Off on GEZE Perlan & Rollan glass clamping plates 

GEZE perlan glass clamp
Focus on the 30mm glass clamping plates which are used to attach the toughened glass to the top hung sliding door gear for both the GEZE Perlan and the Rollan sliding door gear for frameless glass. The glass does not need to be drilled for the clamps. The clamps are suitable for glass of 8mm, 10mm or 12mm thickness and are supplied with short covers to hide the clamp fastenings. The German name for these is nice and easy to transplate:  Glasklemmplatte! Full length clamp covers are also available in two lengths, 950mm and 1450mm. The cover attaches to the 30mm glass clamping plates and provide an asthetically pleasing look across the top of the door with the minimum of effort. When the end of the covers are more than 200mm from the clamps then a set of End Clamps are required to ensure the stability of the covers at either end of the glass.

The Saheco SF-51 for sliding wardrobe doors up to 50kgs each

June 17, 2014 by · Comments Off on The Saheco SF-51 for sliding wardrobe doors up to 50kgs each 

sf-51

The SAHECO SF-51 is the big brother of the SAHECO SF-25, allowing larger, heavier sliding wardrobe doors to be used in conjunction with top & bottom sliding track, with the wheels running on the lower track.  The kit comes in various lengths; 2000mm, 3000mm & 5000mm with all the fixings needed for 2 or more doors. Doors can weigh up to 50kg each, with a maximum width of 1400mm and a maximum height of 2500mm.  The Saheco SF-51 is suitable for sliding  cupboard and sliding wardrobe doors in bedrooms, bathrooms, kitchens, dressing rooms and studies, and can even be used for awkward doors in rooms with angled ceilings. 

iMpero architrave free pocket door gear

June 5, 2014 by · Comments Off on iMpero architrave free pocket door gear 

iMpero architrave-free pocket door gear
The iMpero architrave free deluxe cassette pocket door gear system offers superior running gear and a fully constructed cassette pocket with superior strength. Architrave free for installations where a minimal aesthetic is required and where the door opening needs to be frameless (i.e. without architrave), the kits come with a set of heavy duty custom door frame beading sections. These sections enable the skim coat to be painted / finished to blend in with the door frame for a minimalist aesthetic. Suitable for single or double internal doors, with kits ranging in size from 626mm to 1500mm wide and up to 2700mm high within a 125mm thick finished wall. The pocket door gear comes complete with track, runners, brackets, stops and cassette.  As standard, kits accommodate maximum 44mm thick door leaves. Can be used with the optional full length iMpero glass clamps for frameless glass doors.

SLIDO Design 80-M concealed softstop sliding door kit – NEW!!!

May 21, 2014 by · Comments Off on SLIDO Design 80-M concealed softstop sliding door kit – NEW!!! 

 

SLIDO Design 80-M concealed softstop sliding door kit
The SLIDO Design 80-M is a completely concealed sliding door track system with softstop at both ends.  The system uses a concealed top track that is attached to the back of the door with two bottom rollers to support the weight of the door at either end.  The bottom rollers do not need any track as they just roll on the hard floor, and a morticed floor guide helps keep the door running straight.  The top roller carriage is designed to take some of the weight of the door and keep the door in place whilst the bottom rollers take the rest of the door weight.  The top track is partially morticed into the top of the door (see diagram on the right) and has a softstop brake at either end.  The SLIDO range of sliding door gear offers superior running performance due to low friction nylon wheels and roller bearing axles.

Bottom