Monthly Archives: November 2010

I am looking for a sliding folding concertina door system to fold 8 x narrow doors , 4 each way. Doors are 2200 mm x 235 mm x 35 mm in size and weigh approx. 20 kg each. I will need a system which has both top and bottom tracks – 2100 mm in length.

The suitable gear for the sliding folding arrangement you describe for your doors would be the Coburn Foldaside 100, (see components listed on our web page at the link shown) a set to do all 8 doors on a 2.1m … Continue reading

Posted in sliding door gear | Tagged , , , | Comments Off on I am looking for a sliding folding concertina door system to fold 8 x narrow doors , 4 each way. Doors are 2200 mm x 235 mm x 35 mm in size and weigh approx. 20 kg each. I will need a system which has both top and bottom tracks – 2100 mm in length.

I have a personal access door on my steel garage, outward opening. Door size 950mm. I live on Skye and it is very windy. I need a door closer that would be strong enough to prevent the wind catching the door and damaging the hinges. Please advise, many thanks.

The best door closer to use for this scenario would be the Geze TS4000, fitted on the PUSH side of the door in the figure 61 position (body on the transom with the arm on the door, see picture below).  … Continue reading

Posted in door closers | Tagged , , , , , | Comments Off on I have a personal access door on my steel garage, outward opening. Door size 950mm. I live on Skye and it is very windy. I need a door closer that would be strong enough to prevent the wind catching the door and damaging the hinges. Please advise, many thanks.

What Fire Door rating must the door be for which I can use the Exidor Range?

The Exidor range has successfully passed a fire test, which will allow the panic hardware to be used on any fire door that has been tested. It is the door which will carry the certification, as it is the door … Continue reading

Posted in panic hardware | Tagged , | Comments Off on What Fire Door rating must the door be for which I can use the Exidor Range?

Q: Are Exidor products Fire Rated?

The Exidor 200 / 300 series range of Bolts and Latches have been fire rated for use on timber and steel doors. The 400 series Touch Bars in single, two and three point units have also been tested for use … Continue reading

Posted in panic hardware | Tagged , , | Comments Off on Q: Are Exidor products Fire Rated?

What sized door will a Standard Exidor product fit?

A standard Exidor 200 / 300 series unit will suit doors 1220mm wide and 2440mm high.  The Exidor 400 Series Touch Bars are available in two standard sizes; up to 900mm and 1200mm wide and 2440mm high. The small unit … Continue reading

Posted in panic hardware | Tagged , , | Comments Off on What sized door will a Standard Exidor product fit?