Monthly Archives: December 2010

Q: Will the snow effect my delivery?

(21 Dec 2010) Doorstuff Statement: After being snowed-in yesterday, only Tuffnells are collecting from us today, so there are limited dispatches.  While UPS and Tuffnells are doing their best to get our deliveries to you on time, they are at … Continue reading

Posted in door closers, door handles, panic hardware, service, sliding door gear | Tagged , , , , | Comments Off on Q: Will the snow effect my delivery?

Is an Exidor OAD available with a Lever Handle?

The 200/300 series now offers the 322 lever OAD. The 500 and 700 series both have lever handle OAD’s available, which can be used with single point latches, 2, and 3 point locking Bolts and Pullman Catches.

Posted in panic hardware | Tagged , , , , , , | Comments Off on Is an Exidor OAD available with a Lever Handle?

A sliding glass door with no track on the floor?

Q (from Angela) We wish to fit a glass sliding door in our hallway but don’t want a track going across the floor, do you have anything that could be used? A: The frameless glass sliding door systems which we … Continue reading

Posted in sliding door gear | Tagged , , , , , , | Comments Off on A sliding glass door with no track on the floor?

Why can a 410 OAD not be used to operate a 297 / 296 Panic Latch or a 294 Panic Bolt?

Because the mechanism on the 200 series units operates in one direction only and the amount of travel is limited. Therefore the lever handle would not fully retract the bolts and latches and would also not operate downwards in a … Continue reading

Posted in panic hardware | Tagged , , , , | Comments Off on Why can a 410 OAD not be used to operate a 297 / 296 Panic Latch or a 294 Panic Bolt?

Can I use an OAD from the 200 / 300 series with the 400 series Touch Bar Range?

No, because the bolt-through fixing positions are different. Also the 410 OAD from the Touch Bar range can not be used with the 200 / 300 series range because the mechanism only rotates in the one direction. All accessories need … Continue reading

Posted in panic hardware | Tagged , , , | Comments Off on Can I use an OAD from the 200 / 300 series with the 400 series Touch Bar Range?

I am looking for a long bar handle of good quality to use on a glass sliding interior door, do you have anything suitable?

We do brushed stainless steel back-to-back pull handles in either the “D” shape or the “guardsman” design (also known as “T” bar handles) suitable for frameless glass doors, in a range of sizes.  You can see the prices at the … Continue reading

Posted in accessories, door handles, sliding door gear | Tagged , , , , | Comments Off on I am looking for a long bar handle of good quality to use on a glass sliding interior door, do you have anything suitable?

I need a three panel folding/sliding door, or four panel if three is not possible. The opening is 1.0 mtr wide x 1.85 mtr high. Have you runners that will do this? I can make the doors myself.

As long as your individual door leaves will weigh no more than 7kg each, then I would recommend the Henderson Bi Fold B15 – 4 door kit, which you can cut down to fit the opening.  You can read about … Continue reading

Posted in sliding door gear | Tagged , , , , | Comments Off on I need a three panel folding/sliding door, or four panel if three is not possible. The opening is 1.0 mtr wide x 1.85 mtr high. Have you runners that will do this? I can make the doors myself.