Tag Archives: Coburn
I am interested in the Twin 60 door runners I need to run 3 doors on 2m of sliding door track. Your info states maximum door height is 2 metres. My door height would be 2.110 metres. Can you please tell me if they will work at that height, if not is there an alternative?
The 2m height is only a guideline, and 2.1m should be perfectly okay as long as the doors are rigid. The most critical consideration is the weight of the doors – as long as they are not more than 25kg … Continue reading
I need a three panel folding/sliding door, or four panel if three is not possible. The opening is 1.0 mtr wide x 1.85 mtr high. Have you runners that will do this? I can make the doors myself.
As long as your individual door leaves will weigh no more than 7kg each, then I would recommend the Henderson Bi Fold B15 – 4 door kit, which you can cut down to fit the opening. You can read about … Continue reading
Q: (from Dennis) I have two doors measuring 6 foot x 21 inches 3/4 inch thick which I want to slide past each other like a in wardrobe on double tracks top and bottom. They are 15kgs each and 16mm … Continue reading
I’m looking for wardrobe sliding door gear with a length of 2900mm to take three doors (MDF) running on two tracks. One door at rear with two at front. Any ideas please?
As long as your individual doors are less than 25kg each in weight, then you can choose between the Coburn Jason bottom running wardrobe gear (you’d need to order 2 kits to get the length) or the Coburn Twin 60 … Continue reading
I am looking for a sliding folding concertina door sytem to fold 8 x narrow doors , 4 each way. Doors are 2200 mm x 235 mm x 35 mm in size and weigh approx. 20 kg each. I will need a system which has both top and bottom tracks – 2100 mm in length.
The suitable gear for the sliding folding arrangement you describe for your doors would be the Coburn Foldaside 100, (see components listed on our web page at the link shown) a set to do all 8 doors on a 2.1m … Continue reading
I have built 2 wardrobes, originally I was intending to hang 2 x 444mm doors on each carcass using standard sprung hinges. Unfortunately this would leave no space between the wardrobe and the bed, therefore I am now looking at a sliding door system. I need a system which will fulfill my dimensions and provide tracks for both top and bottom, along with all other hardware in terms of rollers etc. Please could you advise on a suitable system which would provide everything I need?
As long as your doors are no more than 25kg each and 12mm minimum thickness, then we would recommend the Jason sliding door gear: 4J – 2 door kit 1200mm (47″) which you can cut down to size. This will … Continue reading
Q: I have a 60cm width cupboard door in bedroom I’d like to make into a sliding door to save space. Please could you advise me if any of your sliding gear is suitable for this job?
A: If the door is less than 9 kgs in weight you could use a Coburn Hush kit, or if the doors are up to 25 kgs you might look at a Coburn Jason kit. The other alternative for doors … Continue reading
Thank you for your enquiry. The weight limit on the Coburn Hush is per door.