Our office is fitted with GEZE TS1500 door closers throughout…

…on one of them the bolt (the one with ratchet-type notches around the head) which goes through the arm and into the rectangular device has broken in two. Can you supply a replacement bolt please, for what is otherwise a perfectly good piece of equipment? There is available a screw pack for the TS1500 which…

Read More

Q: Will the snow effect my delivery?

(21 Dec 2010) Doorstuff Statement: After being snowed-in yesterday, only Tuffnells are collecting from us today, so there are limited dispatches.  While UPS and Tuffnells are doing their best to get our deliveries to you on time, they are at the mercy of the winter roads.  We will keep you updated here about our weather…

Read More

A sliding glass door with no track on the floor?

Q (from Angela) We wish to fit a glass sliding door in our hallway but don’t want a track going across the floor, do you have anything that could be used? A: The frameless glass sliding door systems which we do, the Geze Rollan 80G, the Perlan 140G, the Perlan SoftStop Glass and the Projeto…

Read More

I need a three panel folding/sliding door, or four panel if three is not possible. The opening is 1.0 mtr wide x 1.85 mtr high. Have you runners that will do this? I can make the doors myself.

As long as your individual door leaves will weigh no more than 7kg each, then I would recommend the Henderson Bi Fold B15 – 4 door kit, which you can cut down to fit the opening.  You can read about it and see the price at the link.  If your doors will be heavier, then…

Read More

Is there panic hardware for INWARD opening doors?

Q: (from John) We have a fire exit door that opens inward and we require to fit a lock that can only work from inside the building, do they make such a thing? A: The Exidor 500 series(opens in new tab) can work on pull-to-open fire escape doors (as well as the more usual push-to-open).  This…

Read More

Help! Our door closer slams the door

…My freeholder has just fitted a door closer at my request as the main door slams when people close it. However, the one they have fitted has not remedied the problem as the door needs to be closed very gently to eliminate the slam (and rattle of glass in the door).  Do you have a…

Read More

Can the cylinder in an OAD be interchanged?

The Exidor range includes Outside Access Devices (OAD’s) with interchangeable and non-interchangeable cylinders. All the Exidor OAD units, except for the 298 and 409 units, have interchangeable cylinders. The cylinders in the 302 OAD have to be drilled and tapped from the back, but the 322, 400, 500 and 700 series OAD uses the conventional…

Read More

Recommend a wardrobe sliding door kit for my doors?

Q: (from Dennis) I have two doors measuring 6 foot x 21 inches 3/4 inch thick which I want to slide past each other like a in wardrobe on double tracks top and bottom.  They are 15kgs each and 16mm thick.  Would your kit be suitable? A: Yes, the Coburn Jason 4J can take doors…

Read More

I’m currently detailing a sliding door using the Projeto 150 system and was wondering if you have the dimensions of the floor mounted guide for the timber door as it seems to be the only element not dimensioned on the pdf?

The door stops for the Projeto 150 are on the track itself, not the floor, and included in the kit.  The dimensions of the floor guides are 19.8mm width x 51mm length x 17mm tall.  You mortice a groove in the bottom of the door so it runs along the floor guide.  They are 304…

Read More

I’m looking for wardrobe sliding door gear with a length of 2900mm to take three doors (MDF) running on two tracks. One door at rear with two at front. Any ideas please?

As long as your individual doors are less than 25kg each in weight, then you can choose between the Coburn Jason bottom running wardrobe gear (you’d need to order 2 kits to get the length) or the Coburn Twin 60 top hung wardrobe gear (again the longest kit is 2.4m, so you’d need 2 kits…

Read More

We have an Exidor 500 series panic hardware with a red oval door bar we need replacing as the bar lever that attaches to the lock has snapped, is this spare part available?

If the lever of the locking unit has broken, then the whole thing can be replaced for the price of the locking unit component.  (If it’s the slave unit, then contact us and we can quote you for a replacement part.)  The prices for coloured Exidor products (e.g. ruby red) are on each product page. …

Read More

How do I stop the door closer slamming the door?

Q: (from Costa) I have a door fitted with a Geze TS4000E door closer and I dont know how to perform the final slam adjustment. The door is shutting perfectly until the last 10 degrees or so when it just lets go and slams LOUD!  I have turned down the closing force and increased the…

Read More