Blog

Q: Do I need to use the cavity widening kit with the H30 Hideaway pocket door?

By Door Admin / 21 October 2010

A: (from Doorstuff) You only need to use it if the door is between 36 and 44mm thick.  Without the cavity widening kit, your finished wall thickness will be 115mm, however you can use the cavity widening kit to increase your finished wall thickness to 120mm whilst using a 35mm thick door (all based on…

What & where to buy: Doors to suit Hideaway pocket door gear?

By Door Admin / 9 September 2010

The H30 is the pocket door gear only and you will need to supply the door itself.  Any normal timber door/glazed timber door will be suitable, as long as it’s up to 760mm wide x 2032mm tall x between 35mm and 44mm thick and 56Kgs maximum weight.  These dimensions make it a standard domestic door,…

Q: Would it be possible to adapt your Hideaway system to incorporate a glass door?

By Door Admin / 29 July 2010

Unfortunately there are no compatible glass clamps available for the Hideaway system.  The two alternatives you might consider are the iMpero pocket door system buying additional glass clamps (+ probably the timber jambs for glass doors), OR buying a Rollan 80G or Perlan 140G sliding door kit for glass and constructing your own cavity supports…

Q: Please can you confirm if you have any sliding door kits that are suitable for a kitchen. In particular I am concerned that a kitchen door is normally a fire door. Do sliding doors meet the safety/building requirements for use as a kitchen door and if so which kit should I use?

By Door Admin / 6 July 2010

A: The only fire rated sliding door gear we can offer is the iMpero pocket door fire door kit.  A “normal” (i.e. non-pocket) sliding door could not ever meet fire regulations because of the inevitable air spaces between the wall and the door.

I’m looking to divide up two rooms in my house. At the moment I have an opening in a studded partition wall 1375mm wide by 2055mm high. My question relates to the Hideaway pocket door system; is it possible to retro fit the system to a wall which is already completed or can it only be fitted to a frame specially built to suit the system?

By Door Admin / 4 July 2010

It is possible to retro fit a Hideaway kit by opening the stud walling on one side only, but how much work this will be will depend on what you find inside the wall in terms of the structure already there.  In terms of width you’ll need (2 x door width) + 1 inch.

I am thinking of getting the Hideaway pocket door system, how easy is it to install?

By Door Admin / 2 May 2010

If you would like to watch a video of the installation made by the manufacturer, you can watch it: click here.

Q: What is the best product for a recessed sliding door i.e. one that is concealed within a partition wall, I will be using a 24″ x 78″ door?

By Door Admin / 27 April 2010

A: We supply two designs of pocket door gear, the iMpero pocket door gear is the best one as far as wall reinforcement, engineering of mechanism, range of sizes, optional extras etc are concerned, and the Hideaway is the best one if you’re on a tight budget, still well made and versatile. Both can be seen…

Can you tell me what width the stud walls need to be to house the Hideaway pocket kit please?

By Door Admin / 10 April 2010

The finished wall thickness outside the Hideaway pocket door kit will be 115 – 120mm (depending whether you use the packer which comes in the kit or not).  This assumes 2 x 12.5mm thick wall boards are used.