Blog

I am looking for some tracking to fit four 30″ wardrobe sliding doors. Do you have any, I need it in one length?

By Door Admin / 15 January 2012

With 4 wardrobe doors of 30″ width, I estimate you’re looking for about 3 metres of track. The SAHECO SF-30 or SAHECO SF-53 would be the best systems – which one will depend upon the weight of the doors, they both come up in a variety of kit / track lengths.  You might go for…

Do your BK bottom door tracks get fixed flush with floor level so that the closed doors can be draught free and there is nothing sticking up from the floor to trip over?

By Door Admin / 29 January 2011

Although it is not designed this way, the BK4 surface mounted floor guide could be recessed into a groove on your floor.

Recommend a wardrobe sliding door kit for my doors?

By Door Admin / 22 November 2010

Q: (from Dennis) I have two doors measuring 6 foot x 21 inches 3/4 inch thick which I want to slide past each other like a in wardrobe on double tracks top and bottom.  They are 15kgs each and 16mm thick.  Would your kit be suitable? A: Yes, the Coburn Jason 4J can take doors…

I’m looking for wardrobe sliding door gear with a length of 2900mm to take three doors (MDF) running on two tracks. One door at rear with two at front. Any ideas please?

By Door Admin / 20 November 2010

As long as your individual doors are less than 25kg each in weight, then you can choose between the Coburn Jason bottom running wardrobe gear (you’d need to order 2 kits to get the length) or the Coburn Twin 60 top hung wardrobe gear (again the longest kit is 2.4m, so you’d need 2 kits…

I am trying to find a sliding wardrobe system that would allow me to have sloping doors to fit in a dormer window. Either a front mounted system I could fit to a shelf within the wardrobe or a floor mounted system?

By Door Admin / 25 September 2010

The sliding door gear we would recommend for your situation is the Coburn Jason, it has wheels running on a track at the bottom and a top track to act as a guide.

A lock for sliding wardrobe doors?

By Door Admin / 3 September 2010

Q: (from John) I need to lock some sliding wardrobe doors.  How can I do it? A: (from Doorstuff) The only solution we can offer is to use a 3 lever mortice sliding door lock, see that link.

Customer Query: Sliding Door Systems

By Door Admin / 23 June 2010

“I have built 2 wardrobes, originally I was intending to hang 2 x 444mm doors on each carcass using standard sprung hinges. Unfortunately, this would leave no space between the wardrobe and the bed, therefore I am now looking at a sliding door system. I need a system which will fulfill my dimensions and provide…

Turning a Cupboard Door into a Sliding Door

By Door Admin / 10 May 2010

Q: I have a 60cm width cupboard door in bedroom I’d like to make into a sliding door to save space. Please could you advise me if any of your sliding gear is suitable for this job? A: If the door is less than 9 kgs in weight you could use a Coburn Hush kit,…

Regarding Hush sliding door gear, is the quoted weight per door or the total of a pair?

By Door Admin / 26 April 2010

Thank you for your enquiry. The weight limit on the Coburn Hush is per door.

Customer Query About Replacing a Damaged Mirror Wardrobe

By Door Admin / 5 December 2009

Q: The bottom track of my mirror wardrobe doors has recently snapped and I am try to locate a replacement. There are no manufacture’s markings. Would your BK4 product (lower track) provide the answer? My doors have metal grooved rollers that run on plastic/nylon track. Does your BK4 track come in sections longer than 2m,…