Blog

iMpero architrave free pocket door gear

By Door Admin / 5 June 2014

The iMpero architrave free deluxe cassette pocket door gear system offers superior running gear and a fully constructed cassette pocket with superior strength. Architrave free for installations where a minimal aesthetic is required and where the door opening needs to be frameless (i.e. without architrave), the kits come with a set of heavy duty custom…

Anne Marie Morris MP visits Doorstuff

By Door Admin / 19 May 2014

Doorstuff today welcomed Member of Parliament for Newton Abbot Anne Marie Morris for a visit and tour, meeting some of our team and then sharing coffee and doughnuts with invited neighbouring business owners Roger of HBD Flooring and Mark of Rockwood Composites.  Anne Marie learned all about sliding door gear and architectural ironmongery before delving…

NEW – Pocket door bathroom lock set

By Door Admin / 6 May 2014

Now in stock, the new JV825 pocket door bathroom lock is ideal for a sliding pocket door (40mm to 44mm thick). Because it has a flush thumbturn it allows the door to retract fully into your pocket door cavity, maximising your clear opening space.  It comes complete with a circular end finger pull, to pull…

Self adhesive brush strip available for dressing up your Hideaway pocket door kit

By Door Admin / 28 April 2014

Use this self adhesive brush strip for the gap between the Hideaway pocket door and your timber jambs. The brush will fill a gap up to 7mm wide. They come in 5m lengths, which is enough for a standard door set. For double or tall doors order 2 sets.

Temporary Dwellings in Disaster Zones Built From Cardboard Tubes

By Door Admin / 28 March 2014

A Japanese architect has won the 2014 Pritzker Architecture Prize for designing a range of buildings for refugees of natural disasters.  Shigeru Ban uses long cardboard tubes to construct “low-cost but dignified housing” which he first proposed in 1994 in response to the Rwandan genocide.  Since then, his buildings have served as shelter for people…

A fire rated double pocket door set

By Door Admin / 10 March 2014

  At last a FIRE RATED pocket door kit which can be used with two standard FD30 doors to create a fire rated double door set.  The intumescent seals are supplied within attractive architrave-free corner profiles to give a crisp modern look.  The iMpero cassette system of interlacing metal reinforcing sheets provides exceptional wall rigidity,…

A fire door test at Lorient

By Door Admin / 21 February 2014

Members of the Institute of Architectural Ironmongers were treated to a fire test at Lorient UK‘s headquarters in Newton Abbot today.  The furnace was fitted with two miniature hinged 30 minute fire doors (FD30s) each with reinforced vision panels.  The door on the left was fully sealed with intumescent materials, which are designed to swell…

A Coburn HIDEAWAY™ Pocket Door…

By Door Admin / 31 January 2014

…Frame Kit is a simple way to increase available space in many domestic applications, particularly dining rooms, en-suite bathrooms, cloakrooms and doors into kitchens.  Using a 35mm thick standard domestic timber door, a finished wall thickness of 115mm can be achieved including the wallboards, allowing the door to slide into the pocket within the wall.  Standard…

CE Marked Doorsets – Business as usual for Door Assemblies in 2014

By Door Admin / 7 January 2014

Door assemblies are still legal after 1 July 2013.   And they will stay legal for the foreseeable future.  Door assemblies are NOT doorsets – so CE marking doesn’t apply to them. You can’t tell the difference between doorsets and door assemblies just by looking at them. It’s how they’re supplied that matters. If it all…

Seasons Greetings!

By Door Admin / 17 December 2013

Our last date for dispatch this year is Thursday 19th December and our sales office closes at 4pm on Friday 20th December.  We will begin dispatching again on 2nd and 3rd January 2014, but our sales office and phone lines do not re-open until Monday 6th January.  If you need to contact us about an order,…

Using the GEZE Rollan sliding door gear within an opening instead of a pocket door kit, such as the Hideaway or iMpero (building a homemade ‘pocket’ of your own design). Is there a reason why this wouldn’t work?

By Door Admin / 22 October 2013

The GEZE Rollan sliding door gear can be used inside your own stud work to form a pocket door system – quite a lot of people do this in our experience.  The only disadvantage might be that in order to get a nice rigid wall structure you would have to use some strengthening material in the pocket, and…

Do I need door stops for a pocket door system, or are they included in the kit?

By Door Admin / 27 January 2012

Our iMpero pocket door system DOES come with stops in the track, so that’s how you control the door on maximum opening.  And the Hideaway pocket door kit comes with a rubber buffer which you attach to the back of the door.

What Sliding Door Goes Seamlessly Back into the Wall?

By Door Admin / 7 January 2012

From this description, it sounds as if you’re looking for a pocket door system, where the door slides back into a cavity in the stud walling like this photo?  We supply two different basic designs of pocket doors – the Hideaway and the iMpero.  You can have a look at them on our website at the…

How much wall space does a Hideaway need?

By Door Admin / 7 January 2012

Q: I’ve ordered a Hideaway pocket door system today, but before it arrives tomorrow I need to know how much space to leave in my wall for the whole thing to fit in? A: You need to allow 2 x (door width) + 1 inch.

Secret POCKET DOOR discovered in Skyrim!

By Door Admin / 23 December 2011

As a bit of Christmas fun, we thought we’d share the discovery of a secret POCKET DOOR behind a wardrobe in the Sleeping Giant Inn, Riverwood, Skyrim.  To find it you’ll have to be on the quest for the “Horn of Jurgen Windcaller”, but if you fancy having one in your own worldly abode, you…

Q: Can a Hideaway pocket door kit be fitted from one side of a plasterboard stud partition?

By Door Admin / 29 August 2011

A: Yes, it is possible to fit a Hideaway pocket door system from one side only, we are aware of customers who have done this successfully, although your finished wall thickness will be slightly more than the 115 – 120mm shown in the specifications.  How easy the project is may depend on what you find…

Do your pocket doors provide any sound insulation between the adjacent rooms (i.e. in the partition itself as well as where the 2 doors meet each other)?

By Door Admin / 3 June 2011

There is no sound insulation material supplied with either pocket door systems we supply (the Hideaway and the iMpero deluxe), but it would be possible to add your own brush strip to the top and bottom of the doors, although this wouldn’t look right on the leading edges.  The wall cavity is going to be…

What is a simultaneous opening kit for sliding door gear?

By Door Admin / 5 March 2011

Used on double doors sliding on one track, meeting together in the middle and opening to give a wide access space, the doors are connected to each other via a toothed belt so that, when one door opens (or closes) the other door mirrors it automatically, so the doors open together and close together, but…

Q: Do you only do silver flush pull handles for pocket doors as I’m looking for brass or gold fittings?

By Door Admin / 22 January 2011

A: We stock the rectangular flush pull handles in polished brass finish, priced the same as the stainless steel ones pictured here.

Can I fit the glass door at a later date after the pocket sliding gear has been fitted into the cavity?

By Door Admin / 15 January 2011

With the iMpero there is access built-in to do that, the Hideaway cannot be used with frameless glass.  In fact it is recommended that you fit the gear first, so you can measure the exact size of glass to buy, perhaps by making a template from chipboard.

Door hardware for a sliding pocket door to a disabled wc which would comply with Doc M/disability guidelines?

By Door Admin / 5 January 2011

The problem with most large/projecting disability handles is that they won’t suit pocket doors without severely restricting closure of door and hence clear opening size. We don’t have space to make the door wider to compensate. Is there anything suitable? We supply a pocket door bathroom lock set, which includes a mortice lock for the…