Top


Part of Devon Buy with Confidence

No quibble returns

Under the bonnet of a TS3000V – how to adjust the power, closing speed and latching action.

October 3, 2013 by · Comments Off on Under the bonnet of a TS3000V – how to adjust the power, closing speed and latching action. 

adjust-ts3000v-door-closer

We looked under the hood (or slide plate to give it the correct name) of a GEZE TS3000V door closer to photograph the fitting holes and adjustment screws, here’s what you’ll find there.  Its very similar to the TS2000NVBC  but they are not interchangeable with each others arms & guide rails because the spindles are different, they’re hexagon on the TS3000, but splined on the TS2000.

My office front door constantly slams as visitors don’t close it by hand, they just leave it to swing back. Do you have anything that can make the door close softly but not delay the closing too much as people come in quickly and don’t check whether it’s closed behind them and I’m concerned about security but can’t stand the constant noise and damage to the door. Can you suggest a solution?

September 14, 2010 by · Comments Off on My office front door constantly slams as visitors don’t close it by hand, they just leave it to swing back. Do you have anything that can make the door close softly but not delay the closing too much as people come in quickly and don’t check whether it’s closed behind them and I’m concerned about security but can’t stand the constant noise and damage to the door. Can you suggest a solution? 

A hydraulic overhead door closer with adjustable closing speed and adjustable latching action will solve your problem.  You can set the closing speed to fast, then use the latching action to give a slower firm close at the last 10° or so.  Which door closer you go for depends on all the normal considerations; door timber or uPVC, width of door, push or pull side, budget? etc.  A good place to start looking is the excellent Geze TS4000, which will be able to handle almost any situation, then you can look at the lower spec models depending on the considerations listed.

Bottom