A digital lock to fit a specific door?

Q: (from Sharon) I have a solid pine door with a door depth of 34mm (I have measured this several times and it is definitely 34mm or maybe just slightly less) – do you stock a digital door lock that would fit this please – most of what I am finding are for 35mm upwards?…

Read More

My office front door constantly slams as visitors don’t close it by hand, they just leave it to swing back. Do you have anything that can make the door close softly but not delay the closing too much as people come in quickly and don’t check whether it’s closed behind them and I’m concerned about security but can’t stand the constant noise and damage to the door. Can you suggest a solution?

A hydraulic overhead door closer with adjustable closing speed and adjustable latching action will solve your problem.  You can set the closing speed to fast, then use the latching action to give a slower firm close at the last 10° or so.  Which door closer you go for depends on all the normal considerations; door…

Read More

Growing at the Double

A giant pin shaped sign with the letter 'A' and loads of people holding it up.

Doorstuff Ltd, the premier door hardware company in the South West, has trebled its warehouse size to accommodate increased inventory as its customer base continues its rapid growth. The locally-owned company, established in 2006, has moved into a 130 sq.m building at 7 Venture Court, Bradley Lane, Newton Abbot. Additional handling space and capacity will…

Read More

What & where to buy: Doors to suit Hideaway pocket door gear?

The H30 is the pocket door gear only and you will need to supply the door itself.  Any normal timber door/glazed timber door will be suitable, as long as it’s up to 760mm wide x 2032mm tall x between 35mm and 44mm thick and 56Kgs maximum weight.  These dimensions make it a standard domestic door,…

Read More

I need a door closer for just an average door, nothing heavy duty. It’s width is 804mm (not sure if that helps). Currently, as soon as a little bit of wind gets a hold of it, it slams shut, which is very loud and annoying. I am hoping you can help me with some advice as to which one would best suit my needs.

As long as you go for a hydraulic door closer with adjustable latching action, then the closing is fully controlled, and slamming can be prevented.  A good door closer for that size of door is the Eurospec T2024(opens in new tab), and if you’re price conscious you might like to know we have some special…

Read More

A lock for sliding wardrobe doors?

Q: (from John) I need to lock some sliding wardrobe doors.  How can I do it? A: (from Doorstuff) The only solution we can offer is to use a 3 lever mortice sliding door lock, see that link.

Read More

A curved floor guide for curved sliding doors?

Q: (from Clare) The company I work for recently installed two semi-circular “pods” or freestanding meeting rooms. The doors are sliding and are held onto the frame by the top track, but when you open and close them there is some sideways movement which makes them feel unstable.  I was therefore wondering whether the BK2…

Read More

Customer Queries: Replacing a Geze Boxer Concealed Door Closer

“I’m trying to replace a concealed door closer which I believe is a Geze Boxer. The body of the one I have measures 240mm long, but on the pdf you show the length to be 286m, it’d the same on Geze’s own website, and everywhere else I’ve looked. Please help?” On the technical drawing on…

Read More

What are pullman catches?

Q (from Rachel) We are looking for a Panic bar to suit a uPVC french door(opens in new tab).  We don’t need a handle on the outside.  The Exidor 502A-B looks like it will do the job.  What do the optional extras mean (Horizontal pullman catches & Vertical pullman catches)? A: (from Doorstuff) The pullman…

Read More

We already have Exidor push opening system on all our exterior doors, and we have a key lock on the outside, we need to replace all the locks with a push button system. Does the thicknesses of the doors matter? Can we set them to be unlocked sometimes?

The CL1’s and CL2’s can be fitted to doors up to 60mm thick without modification.  The CL1 digital lock requires the code to be entered every time the door is opened from the outside.  The CL2 can operate that way, but can also be set to “passage function” which allows free access from the outside,…

Read More

Geze Slimdrives?

Q: (from Nick) I need a Geze Slimdrive EMD F-IS double swing operator with motion detectors. A: (from Doorstuff) Although we ARE Geze distributors, we don’t currently supply automatic door operators.  Can I refer you to Geze themselves, you can phone them on 01543 443000 ask for the autos dept.  Alternatively you can email them…

Read More

Do Geze pivot fittings open as far as 180°?

Q: (from Mike) Please confirm that the Geze TS550 pivot fittings(opens in new tab) we have proposed for our single action pivoting doors in a BFI refurb scheme are suitable for opening to a 180 degree hold open position, along with size to weight ratio (doors are 2.7m high x 1050mm wide x 44mm thick)?…

Read More

Can you ID this photo & supply replacement cylinders?

Q: (from Ted) Can you identify this lock from my photo and are replacement cylinders available?   A: (from Doorstuff) It’s an Exidor 302 EC Outside Access Device in Silver, and yes, you can purchase replacement cylinders though us.  If you have a masterkeyed suite contact us, as it may be possible to obtain a…

Read More

A fire escape door with a micro switch for an alarm?

Q: (from Simon) I am the caretaker of a school.  There is a door which must be a fire escape door in a wing of the school which is seldom used.  If it is opened in any non-fire related event, then staff in the reception office need to be alerted by alarm so it can…

Read More