Q: Please can you confirm if you have any sliding door kits that are suitable for a kitchen. In particular I am concerned that a kitchen door is normally a fire door. Do sliding doors meet the safety/building requirements for use as a kitchen door and if so which kit should I use?

A: The only fire rated sliding door gear we can offer is the iMpero pocket door fire door kit.  A “normal” (i.e. non-pocket) sliding door could not ever meet fire regulations because of the inevitable air spaces between the wall and the door.

Read More

I’m looking for a door closer for the front door of my little shop. I think something like the Geze TS1500 will be suitable. The thing that’s worrying me is that the door is directly under a thick lintel. There’s only 30mm from the top of the door to the underside of the lintel. Is this enough space to fit a TS1500?

We assume that the door is inward opening and therefore the door closer will be fitted to the inside of the door (PULL side)?  Then the Geze TS1500 will be a good door closer for you if there’s enough room on the door for the body, the arm will fit comfortably on the 30mm deep transom…

Read More

I’m looking to divide up two rooms in my house. At the moment I have an opening in a studded partition wall 1375mm wide by 2055mm high. My question relates to the Hideaway pocket door system; is it possible to retro fit the system to a wall which is already completed or can it only be fitted to a frame specially built to suit the system?

It is possible to retro fit a Hideaway kit by opening the stud walling on one side only, but how much work this will be will depend on what you find inside the wall in terms of the structure already there.  In terms of width you’ll need (2 x door width) + 1 inch.

Read More

Customer Query: Sliding Door Systems

“I have built 2 wardrobes, originally I was intending to hang 2 x 444mm doors on each carcass using standard sprung hinges. Unfortunately, this would leave no space between the wardrobe and the bed, therefore I am now looking at a sliding door system. I need a system which will fulfill my dimensions and provide…

Read More

Fitting a door closer to an arched door?

Q: (from John) I am a carpenter and have been asked to fit a door closer at a primary school. The door however is an arched one. I fitted some spring hinges, along with a hydraulic hinge. This worked for a short period but the hinges are not man enough. I feel a traditional overhead…

Read More

I am looking for an outside access handle/system through a door fitted with panic hardware inside. This is for after hours hotel guests to come and go. I need to ensure the door is self locking after access from both sides.

To do the job of locking automatically upon closing, we recommend the Exidor 305 mortice operators.  On the inside (push to escape) side of the door you have a normal push bar which comes with a lock case which is morticed into the door.  It comes with a euro profile cylinder and escutcheon as standard…

Read More

Recommend a door closer?

Q: (from Guy) I need a door closer that is hidden or discreet and that closes softly [probably hydraulic?] to fit an old georgian 4-panel door and frame.  The problem is the door is slammed it will crack shower tiles on the adjacent wall because the wall is flimsy and moves a little in my…

Read More

Do you also do sliding front doors for flats? The main door into my building is fine, but the door into my individual flat takes up a lot of the hall space when it opens! Do you sell sliding doors that would be safe and secure enough to be suitable for use as a front door, as that would help me immensely.

Unfortunately neither the sliding door gear nor pocket door gear we supply would be secure enough to use on a front door – the only sliding door locks we supply are 3 lever, so your insurance company wouldn’t rate them either (should be a 5 lever BS rated minimum).  Actually we don’t think you ought…

Read More

A device to help fit AA45 door closers?

I would like to order some AA45 door closers to replace the ones in my flat, but I don’t know how I will be able to fit them. When I tried to remove one of the old ones it was under great tension and I broke it whilst removing.  Do they come with some kind…

Read More

Turning a Cupboard Door into a Sliding Door

Q: I have a 60cm width cupboard door in bedroom I’d like to make into a sliding door to save space. Please could you advise me if any of your sliding gear is suitable for this job? A: If the door is less than 9 kgs in weight you could use a Coburn Hush kit,…

Read More