Blog

Is it possible to buy spare parts for a Exidor 200 series push bar?

By Door Admin / 16 February 2012

Yes, spare parts are a relatively inexpensive way to extend the life of panic hardware.  You can view Exidor panic hardware spare parts, optional extras and keeps on our website here(opens in new tab).

I want a panic push bar for a single timber door, but we also require to gain access from the outside using a lock with key. What do you recommend?

By Door Admin / 25 January 2012

Depending on the answer to this question; Do you want the door to lock behind you, after you’ve entered with the key OR do you want to have to re-lock it with the key?  If you want it lock automatically, then we’d recommend an Exidor 305 mortice operator(opens in new tab), which comes with a…

What are the dimensions of the Exidor 297 push pad?

By Door Admin / 11 January 2012

The Exidor 297 is 159mm tall x 55mm wide x 80mm projecting.  You can see dimensioned diagrams, plus loads of other info on the pdf at this link(opens in new tab) (pdf’s towards the bottom of the page). (opens in new tab)(opens in new tab)

Can I replace this Exidor 285 rebated double door panic hardware?

By Door Admin / 7 January 2012

This photo shows an obsolete Exidor 285 push bar(opens in new tab) for double rebated fire escape doors(opens in new tab).  The obvious identifying feature is the offset touching push bars, angled at the conjunction.  To replace a set like this, order our Exidor 296-4(opens in new tab), which comes with the appropriate keep for…

Is the outside access device 322EC compatible with the Exidor pushbar 296-4?

By Door Admin / 28 December 2011

Yes those units are compatible with each other, you only need one 322EC for the double door set.

What products can be used under the EN 179 standard?

By Door Admin / 13 December 2011

EN 179 covers panic hardware Push Pads and Lever Handle devices, which can be used in areas were members of the public do not have access, such as workplace offices or factories. The standard allows these types of products to be used in areas were users will be familiar with the means of escape and…

Q: Choosing ironmongery for four final fire exit doors and frames which will experience heavy traffic, and need to be secure (would prefer not to have a panic bar), can you recommend a handle arrangement, perhaps with a thumblock on the inside, that would be suitable for these circumstances?

By Door Admin / 21 October 2011

A: For the arrangement you describe we would suggest using escape sashlocks – these have euro cylinder thumb turn locks (i.e. you can have any kind of high security, master keyed, anti pick, anti bump etc euro profile cylinder) but use a split spindle so from the inside the handle will ALWAYS over-ride the lock…

Q: Recommend a product for fire escape doors with door closers – when the doors slam shut they LOCK; so is there a mechanism which allows us to keep the door bolts UNLOCKED until we want to LOCK the doors?

By Door Admin / 13 October 2011

A: Yes, such a mechanism exists and is called a dogging device(opens in new tab), it allows the bolts to be withheld in the retracted position ensuring the automatic top trip catch or Pullman latch do not engage when the door is closed, enabling the door to be opened freely from both sides. It’s disengageable. It…

Q: What is passage mode on the Exidor digilock?

By Door Admin / 18 July 2011

A: Passage mode is an optional feature of the Exidor CL2(opens in new tab) which, when simply set with a screwdriver, allows free access through the door using just the handle, i.e. entry WITHOUT code.  An example of this being used is in a primary school when code entry(opens in new tab) is used during…

Q: Can I put panic hardware on an external gate?

By Door Admin / 16 June 2011

A: Yes, you can.  You might consider going for the Exidor 296 push bar or an Exidor 297 push pad.  It may be necessary to shield the panic bar from the outside to ensure security (depending upon the design of the gate).  You may expect a slightly shortened life expectancy for the units due to…

Q: Keeping a mortice deadlock on a fire exit door fitted with panic hardware?

By Door Admin / 1 May 2011

…I wish to keep a mortice deadlock for added overnight security, is this possible? A: You would need to pass this with your local fire officer who will decide based on the usage of the building.

Q: Does the Exidor 294 come with the keeps for the top and bottom…

By Door Admin / 17 March 2011

…or do you have to buy these separately? A: Shoot bolt keeps for both the top and the bottom are included with an Exidor 294 push bar(opens in new tab).  If there’s anything unusual about your frame, then specialist keeps(opens in new tab) are available to order.

Is there a digital lock for panic hardware with a knob rather than a lever?

By Door Admin / 1 February 2011

No, the Exidor CL1 and CL2 outside access devices have a handle rather than a knob.  The Disability Discrimination Act calls for the use of handles over knobs, as they are easier to use.

I have a fire door in a specialist nursing home caring for vulnerable adults which…

By Door Admin / 20 January 2011

…needs to be opened on a regular basis to allow access for staff but which also needs to discourage the residents from using it, for their own safety.  Therefore it needs to be secure but easily opened daily and opened by anyone in an emergency. Have you any suggestions please? This situation can be addressed…

Q: I’m looking at your panic hardware here on the site, I have a 1000mm wide door, what is the actual length of the push bar on the Exidor 294?

By Door Admin / 12 January 2011

A: The bar itself comes at 1180mm long in both the standard Exidor 294 and Exidor 296 kits and is designed to be cut down to size. For future reference, oversize bars are available at 1600mm and 2100mm in panic hardware optional extras(opens in new tab).

We need a door lock which is permanently open on the inside but locked outside?

By Door Admin / 9 January 2011

With the limited information given in the question, we might suggest either an escape sashlock set(opens in new tab), or a fire escape push bar(opens in new tab) or push pad, both will perform that function but which is most suitable will depend on the usage of the door.  You can see information about both…

Q: Will the snow effect my delivery?

By Door Admin / 21 December 2010

(21 Dec 2010) Doorstuff Statement: After being snowed-in yesterday, only Tuffnells are collecting from us today, so there are limited dispatches.  While UPS and Tuffnells are doing their best to get our deliveries to you on time, they are at the mercy of the winter roads.  We will keep you updated here about our weather…

Is an Exidor OAD available with a Lever Handle?

By Door Admin / 14 December 2010

The 200/300 series now offers the 322 lever OAD. The 500 and 700 series both have lever handle OAD’s available, which can be used with single point latches, 2, and 3 point locking Bolts and Pullman Catches.

Why can a 410 OAD not be used to operate a 297 / 296 Panic Latch or a 294 Panic Bolt?

By Door Admin / 7 December 2010

Because the mechanism on the 200 series units operates in one direction only and the amount of travel is limited. Therefore the lever handle would not fully retract the bolts and latches and would also not operate downwards in a normal manner. Also, all accessories need to be listed on the Manufacturers Declaration of Conformity,…

Can I use an OAD from the 200 / 300 series with the 400 series Touch Bar Range?

By Door Admin / 4 December 2010

No, because the bolt-through fixing positions are different. Also the 410 OAD from the Touch Bar range can not be used with the 200 / 300 series range because the mechanism only rotates in the one direction. All accessories need to be listed on the Manufacturers Declaration of Conformity, and using any accessory not listed…

Is there panic hardware for INWARD opening doors?

By Door Admin / 26 November 2010

Q: (from John) We have a fire exit door that opens inward and we require to fit a lock that can only work from inside the building, do they make such a thing? A: The Exidor 500 series(opens in new tab) can work on pull-to-open fire escape doors (as well as the more usual push-to-open).  This…