Blog

Can the cylinder in an OAD be interchanged?

By Door Admin / 23 November 2010

The Exidor range includes Outside Access Devices (OAD’s) with interchangeable and non-interchangeable cylinders. All the Exidor OAD units, except for the 298 and 409 units, have interchangeable cylinders. The cylinders in the 302 OAD have to be drilled and tapped from the back, but the 322, 400, 500 and 700 series OAD uses the conventional…

We have an Exidor 500 series panic hardware with a red oval door bar we need replacing as the bar lever that attaches to the lock has snapped, is this spare part available?

By Door Admin / 18 November 2010

If the lever of the locking unit has broken, then the whole thing can be replaced for the price of the locking unit component.  (If it’s the slave unit, then contact us and we can quote you for a replacement part.)  The prices for coloured Exidor products (e.g. ruby red) are on each product page. …

What Fire Door rating must the door be for which I can use the Exidor Range?

By Door Admin / 9 November 2010

The Exidor range has successfully passed a fire test, which will allow the panic hardware to be used on any fire door that has been tested. It is the door which will carry the certification, as it is the door which will prevent a fire from escaping an area of a building. The Exit Hardware…

Q: Are Exidor products Fire Rated?

By Door Admin / 9 November 2010

The Exidor 200 / 300 series range of Bolts and Latches have been fire rated for use on timber and steel doors. The 400 series Touch Bars in single, two and three point units have also been tested for use on Timber and Steel Fire Doors.

What sized door will a Standard Exidor product fit?

By Door Admin / 2 November 2010

A standard Exidor 200 / 300 series unit will suit doors 1220mm wide and 2440mm high. The Exidor 400 Series Touch Bars are available in two standard sizes; up to 900mm and 1200mm wide and 2440mm high. The small unit measures 650mm and will operate within a 692mm door opening. The larger unit measures 830mm…

Does the Exidor 305 accept a single euro cylinder?

By Door Admin / 29 October 2010

Q: (from Julian) Does the Exidor 305 come with an external access device that accepts a single euro cylinder?  And can the euro cylinder be replaced? A: (from Doorstuff) The Exidor 305 mortice operator does come with a single euro cylinder, which you can replace with an other, for example a masterkeyed cylinder.  The cylinder…

What products can be used under the EN 1125 standard?

By Door Admin / 26 October 2010

EN 1125 covers panic hardware Push Bars and Touch Bar devices, which must be used in areas were members of the public have access, such as places of entertainment or public buildings. The standard requires these types of products to be used in areas were panic situations may occur due to users not being familiar…

Q: We need to replace our outside door access on the fire door as the keys have been lost. Which is your most economic lock that would be suitable?

By Door Admin / 5 September 2010

A: The least expensive outside access device is the Exidor 298.

What are pullman catches?

By Door Admin / 11 August 2010

Q (from Rachel) We are looking for a Panic bar to suit a uPVC french door(opens in new tab).  We don’t need a handle on the outside.  The Exidor 502A-B looks like it will do the job.  What do the optional extras mean (Horizontal pullman catches & Vertical pullman catches)? A: (from Doorstuff) The pullman…

We already have Exidor push opening system on all our exterior doors, and we have a key lock on the outside, we need to replace all the locks with a push button system. Does the thicknesses of the doors matter? Can we set them to be unlocked sometimes?

By Door Admin / 9 August 2010

The CL1’s and CL2’s can be fitted to doors up to 60mm thick without modification.  The CL1 digital lock requires the code to be entered every time the door is opened from the outside.  The CL2 can operate that way, but can also be set to “passage function” which allows free access from the outside,…

Can you ID this photo & supply replacement cylinders?

By Door Admin / 16 July 2010

Q: (from Ted) Can you identify this lock from my photo and are replacement cylinders available?   A: (from Doorstuff) It’s an Exidor 302 EC Outside Access Device in Silver, and yes, you can purchase replacement cylinders though us.  If you have a masterkeyed suite contact us, as it may be possible to obtain a…

A fire escape door with a micro switch for an alarm?

By Door Admin / 14 July 2010

Q: (from Simon) I am the caretaker of a school.  There is a door which must be a fire escape door in a wing of the school which is seldom used.  If it is opened in any non-fire related event, then staff in the reception office need to be alerted by alarm so it can…

Do you have an agent in the Rep. of Ireland? I am interested in the Exidor panic hardware.

By Door Admin / 8 July 2010

We don’t have an agent in Ireland.  We use TNT shipping, so theoretically we can supply anywhere.  Contact us directly with your town & county, we can calculate the weight of your shipment and provide a shipping quote.

I am looking for an outside access handle/system through a door fitted with panic hardware inside. This is for after hours hotel guests to come and go. I need to ensure the door is self locking after access from both sides.

By Door Admin / 11 June 2010

To do the job of locking automatically upon closing, we recommend the Exidor 305 mortice operators.  On the inside (push to escape) side of the door you have a normal push bar which comes with a lock case which is morticed into the door.  It comes with a euro profile cylinder and escutcheon as standard…

Identify an Exidor panic bar assembly?

By Door Admin / 13 April 2010

(from Peter) Q: I need to replace a damaged Exidor panic bar assembly for a Tesco’s store. I do not know which model it is so I have included a photo to help identify it. (from Doorstuff) A: It’s an Exidor 503A-B push bar in Silver, similar to the image below.  Contact us for price…

I am looking to replace a digilock on a panic bar door. However I am interested in one that I am able to deadlock at night once everyone is out of the building. Is there such a thing?

By Door Admin / 22 March 2010

You can use the CL1 outside access device mechanical keypad outside (compatible with an Exidor push pad or push bar inside).  This cannot be deadlocked, but it may be possible to add an additional separate deadlock to the door, but you would need to pass this with your local fire officer who will decide based…

High security emergency exit pad/bar for a heavy duty exterior gate?

By Door Admin / 14 March 2010

(from Dale) Q: I’m looking for a high security emergency exit pad/bar that I can fit to a heavy duty exterior gate.  Do you have a latch product that would be suitable? (from Doorstuff) A: You might consider the 700 series for heavy duty/ high security emergency exits.  See page the page on our website,…

I’m looking for good quality panic exit bolts, where are the Exidor ones made?

By Door Admin / 19 February 2010

The Exidor range is designed to a high specification and manufactured entirely in Great Britain, to a system approved to ISO9001:2000.  They carry the CE mark and have been mechanically tested to EN179 and EN1125.  The Exidor range has also been fire-rated for use on timber and steel doors, approved by Certifire.  If you’re looking…

New product launch today!!!

By Door Admin / 17 February 2010

Doorstuff is delighted to announce the arrival of the Exidor 322EC lever operated outside access device in stock.  You can buy online here, with discounts available for bulk purchases – see product page.