Blog

New product launch: the Exidor 4870 E-mag door closer

By Door Admin / 27 January 2013

A hold open and free swing door closers which can be fitted on either side of the door in Fig 1 or Fig 66 all in one box.  This British made door closer gives good reliability with the flexibility that one unit covers both eventualities.  In stock with quantity discounts.

Frameless glass sliding door cabinets

By Door Admin / 9 November 2012

Ideal for trophy cupboards and shop display cabinets, the Henderson Zenith sliding door gear is a cost effective and smooth running kit to get your glass panels sliding. There are 3 kit sizes available: 1200mm, 1500mm or 1800mm, each suitable for two doors of 6mm thickness glass. You can now find our sliding door products on our…

The Rollan sliding door gear kit comes with short metal floor guides…

By Door Admin / 20 July 2012

…which are designed to be used in conjunction with a groove which you have to mortice into the bottom of the door.  If the door doesn’t travel more than it’s own width, then manufacturer Geze’s invisible Rollan floor guide is the best & most elegant thing to use:-

Handing lift off hinges

By Door Admin / 18 July 2012

Taken from Royde & Tucker‘s literature, this useful illustration is helpful for deciding which hand hinges are required:-

Is there a special tool required to install the AA45 concealed door closer. I was wondering how you open and fix the second face against the spring tension?

By Door Admin / 31 May 2012

Yes, they come with a small metal retainer which holds the chain out while you fit it.  You’ll need to attach the plate to the frame (or a spare bit of wood) then pull the chain out as far as it’ll come and slip in the retainer.  Next detach the plate from the frame and fit the…

Please can you advise me as to which sort of door closer I should buy; I have two doors which are 1100mm wide solid heavyish doors. I want them to be easily opened by the tenants, and not to slam closed, but to close slowly and fully?

By Door Admin / 18 April 2012

If the doors are going to get a lot of traffic, we’d recommend a GEZE TS4000, or at least a GEZE TS2000 NVBC (a door of 1100mm wide will require at least power size 4) but if there are any draught seals on the doors, it may need to be a higher power size.  If…

Congratulations Stuart!

By Door Admin / 4 April 2012

We’d like to say a big thank you & well done to Stuart Christie for planting the Doorstuff flag at Mount Everest Base Camp.  Home today, he’s raised a shed load of money for the British Heart Foundation and achieved a huge personal victory in memory of his mother-in-law Sue.  Way to go, Stuart!

What is a rebated door?

By Door Admin / 14 March 2012

I need to put crash bars on double doors, can you tell me what are rebated doors? Rebated double doors have a lip on the vertical edge where they meet, called a “rebated meeting stile”.  Shown in the photo below, there is a primary or leading leaf (A) which can open and close without effecting…

Enabling and Disabling an External Door Handle For Security

By Door Admin / 14 March 2012

Q: Our local club has an external opening emergency exit door which is fitted with an Exidor panic bar on the inside. Externally there is no way of opening the door and due to the door opening to an external smoking area we would like to fit some sort of hardware whereby the external handle can…

We recently bought your R40.16 timber sliding door kits up to 40kg, but we’ve changed the doors to heavy pine ones as they’re going to have regular use. Do you have anything suitable?

By Door Admin / 14 March 2012

For doors up to 80kg each in weight, you can use the same track as the R40 that you already have, and buy the Rollan 80 extra door packs, this will give you the wheels etc to run in the tracks, which are strong enough to support your doors.  If the doors are more than…

What is the floor guide for the Geze Rollan & Perlan sliding door gear like?

By Door Admin / 16 February 2012

Imagine an upside down capital “T” shaped peice of metal, about 1.5″ long, which is screwed to the floor or threshold, a groove is morticed into the bottom of the door and the door slides back and forth on the guide – never seen, nothing to trip on or collect dust.  Here’s a photo:  

Is it possible to buy spare parts for a Exidor 200 series push bar?

By Door Admin / 16 February 2012

Yes, spare parts are a relatively inexpensive way to extend the life of panic hardware.  You can view Exidor panic hardware spare parts, optional extras and keeps on our website here(opens in new tab).

I’m after some door runners for a custom made door. The runners will need to be 2 metres wide. The weight of the door will be roughly 40kg. It is not a pocket door, just sliding across the wall. Is there also a way for the door to stop it slamming against the walls?

By Door Admin / 10 February 2012

We do the economical Rollan 40.24 which is suitable for doors up to 40kg.  If you want to go for something which closes the door softly at each end (and your door is at least 840mm wide), we recommend the Perlan SoftStop double draw-in, 2050mm track.  Tracks can be cut down to length.  Links to…

I am looking for floor gliders for double sliding wooden doors. We are replacing the old doors and have the track but are missing the gliders.

By Door Admin / 7 February 2012

It is likely that the gliders we supply will be different to those on your existing doors.  The only ones we do similar to your description are the white plastic slides which are used with the BK2 and BK4 bottom guide kits, and they can be bought in pairs for £1.25 per pair (+ postage &…

How many hinges are needed on a door: some have three, some have two, why?

By Door Admin / 2 February 2012

Usually at least 3 hinges need to be fitted on a door.  Light weight internal domestic doors may be fitted with only 2 hinges.  Doors with a security function need to have at least 3 hinges, as this makes them more difficult to force.  Fire Regulations require fire doors to be fitted with 3 hinges…

I need a door closer that is able to close a steel door which is 400kg in weight. The door size is w1000mm x h2050mm.

By Door Admin / 1 February 2012

We recommend looking at a Geze TS4000 tandem (power 7-13), or a TS4000 power 5-7, and caution that this door will be very heavy to open.  You can buy them online here, follow the links in the text.

I’m looking for door closers for a pair of two-way swing doors. Floor springs are one option, but is there another option that would prevent free swinging but return the doors to the closed position? The doors are internal church ones, oak with glass panels, not very wide or heavy.

By Door Admin / 31 January 2012

I think you may be right that floor spring door closers (e.g. Geze TS500 NV) would probably be the best option for your double action doors.  The only other possibility is a concealed closer (e.g. The Geze Boxer) fitted into the head of the door, but you’d need to check there was enough thickness &…

I have a dog that lets itself in through an external door. Is there a door closer that I could easily activate in winter (when I would like the door to close after the dog comes in) but which could be set to leave the door free in summer?

By Door Admin / 29 January 2012

There are two ways of tackling this, depending on your budget.  The “deluxe” solution would be to use an electro-magnetic door closer (the Geze TS4000 EFS) with a PSU, the current to which would be switched ON in summer, so the door can free swing.  In winter you switch the power OFF and the door…

Do you supply the BRITON 2000 range door closers?

By Door Admin / 27 January 2012

Yes, we supply a range of Briton door closers including the Briton 2000 range.  The range includes the heavy duty guide rail Briton 2700, the UK’s most popular door closer the Briton 2003, and the great value Briton 121CE.  

Do I need door stops for a pocket door system, or are they included in the kit?

By Door Admin / 27 January 2012

Our iMpero pocket door system DOES come with stops in the track, so that’s how you control the door on maximum opening.  And the Hideaway pocket door kit comes with a rubber buffer which you attach to the back of the door.

I’m planning to fit 3 sliding-folding doors to break up a through room. Full height internal wooden doors up to 40mm thickness with glass panels, can you recomend a door kit or the parts required?

By Door Admin / 27 January 2012

Probably the best solution is the Foldaside 240 system You could use either the hinges or pivoted systems but the hinged system requires the first door (the one attached to the frame) to be 29mm plus half the door thickness shorter than the other doors. If you already have equal width doors you would need…