Blog

Fixing heights for pull handles to meet BS8300:2009

By Door Admin / 24 September 2013

The original BS8300 described the principles for door furniture.  Although the intention was for guidance and demonstration purposes only, in reality many specifiers and manufacturers alike have been unwilling to stray beyond the dimensions and shapes actually shown.  Consequently pull handles have invariably been 425mm high, round bar design. The revised guidance moves away from fixed…

1500mm long guardsman “T” pull handles in stock now – due to popular demand!

By Door Admin / 23 September 2013

  All our pull handles are extremely popular, but we’ve brought the largest ones (1500mm overall length x 1200mm centres x 32mm diameter bar) in Brushed Stainless Steel into the stock range as they are more and more being ordered for a quick delivery.  These pull handles can be used on standard timber, metal, frameless glass or…

Maximum allowable door sizes using the Geze TS500 NV

By Door Admin / 20 September 2013

  Recently asked to give some broad guidance on maximum allowable door sizes using the Geze TS500 NV floor spring for a set of double timber doors (44mm thick solid core) 1050mm wide, an opening height of 3.2m, where the door height could be maximised without an obtrusive overpanel.  Was there a weight rule of thumb for…

10% off stainless steel sliding door gear

By Door Admin / 19 September 2013

  The Projeto 150 designer stainless steel sliding door gear for timber doors  is on special offer – buy now and get a 10% discount off the displayed prices by entering code 3161DS at checkout.  Add style and function to your home or office space with this beautiful running gear.  This smooth sliding and beautifully engineered…

NEW Softbrake system can be fitted (and post fitted) to SF-30 and SF-53 sliding wardrobe door gear – in stock now!

By Door Admin / 17 September 2013

  NEW Optional Soft Brake:  The SAHECO SF-30 and SF-53 wardrobe sliding door systems can now be fitted with a Soft Brake system which allows the doors to slowly glide to a stop. The system can be fitted at the time of installation or can be post fitted later. The unit is suitable for left…

Karcher heavy duty safety lever handles perform in demanding situation

By Door Admin / 16 September 2013

  Karcher lever handles are renowned for their longevity under duress, and this has proved to be the case as they continue to perform to a very high standard in a local Devon maintained special school for students who experience Social, Emotional and Behavioural Difficulties (SEBD) where ER27 ‘crete’ safety lever handles were supplied by us…

How to change the handing of a HOPPE escape sashlock (AR915)

By Door Admin / 12 September 2013

  1. Latch reversibility:  To reverse the latch bolt insert a screw driver through the hole in the back edge of the lock case, push the slotted head forward firmly and rotate. 2. Escape reversibility:  To reverse the escape function remove the follower plate with a small blade, swap it to the other side of the…

Exidor TB450 electronic latch retraction – now in stock!

By Door Admin / 9 September 2013

  With the ever increasing need for improved security, the Exidor 400 series panic hardware with electronic latch retraction offers a solution whilst still allowing safe emergency exit from inside the building.  It also allows the integration of the buildings access control systems with the panic exit devices.  Meets the Sport England requirement of fully…

“Heavy Duty” is not a subjective term – how to be sure you’re buying quality door handles

By Door Admin / 5 September 2013

  The term “Heavy Duty” is no longer subjective, there are EN standards which define the use and durability of each product. A suite of European product performance standards (ENs) have been developed for most building components, these include a comprehensive range of product performance standards for architectural hardware. Products are ‘marked’ with a six…

Track for wardrobe up to 5 metres wide

By Door Admin / 2 September 2013

  If planning a large wardrobe with 4 or 5 or more doors, then look no further than the SAHECO SF-30 or SF-53 sliding door gear. Available in up to 5m long track, and in single, twin or double track configurations. Ideal for use with MDF doors; maximum weight for the SF-30 is 30 kgs…

10% discount for September

By Door Admin / 28 August 2013

  The Projeto 150G designer stainless steel sliding door gear for frameless glass doors  is on special offer until the end of September 2013 – buy now and get a 10% discount off the displayed prices by entering code 1252DS at checkout.

Doorstuff talks to Homebuilding & Renovating magazine

By Door Admin / 12 July 2013

  Doorstuff’s very own Helen Butland is interviewed by Claire Lloyd in the August 2013 issue of Homebuilding & Renovating magazine for their article about pocket doors.  With a selection of lovely photos of pocket doors in situ, Claire writes about the benefits of designing in a pocket door when rooms are short of space. …

What makes The GEZE TS2000NVBC our bestselling door closer?

By Door Admin / 4 July 2013

It’s the versatility and reliability, its hard wearing but gentle action we love.  While ticking all the regulatory boxes of fire regs, DDA, CE marking etc, it is almost always the best door closer in so many ways.  Let me tell you its story; GEZE designed the TS4000 model with power adjustability, back check as…

Sliding door gear stock holding boost

By Door Admin / 23 May 2013

  This weekend we installed our newest bank of heavy duty racking which has effectively quadrupled our stockholding capacity for the five metre and six metre tracks of sliding door gear.  The result is our increased ability to supply ex-stock the widest range of sizes and specifications of sliding door kits and components for the…

New Mechanical Lock With Optional Hold Open Function

By Door Admin / 9 March 2013

The new Briton 9160 Push Button Mechanical Lock comes complete with an optional hold open function and replaces the Briton 9150, 9155 and P2250 mechanical locks. With a snib on the backplate, the new 9160 allows users the choice of hold open or not. The new lock also enables door hardware specialists to reduce their…

25 year maintenance-free guaranteed hinges

By Door Admin / 6 March 2013

ROYDE & TUCKER HI-LOAD hinges are designed for medium and high frequency use doors(opens in new tab). In accordance with BS 4787, three hinges per door leaf should be fitted. HI-LOAD hinges are guaranteed against wear for a period of 25 years, provided they are correctly specified and fitted. A favourite for 44mm thick fire…

NEW!!! Bottom rolling kit for wardrobes up to 3m wide

By Door Admin / 28 February 2013

Introducing the SAHECO SF-25 sliding door gear for wardrobes and cabinets in a range of kit sizes from 1 to 3 metres in width. Sturdy and smooth running, the SF-25 replaces the COBURN Jason in our range, and brings with it advantages of design, flexibility and track length. Comes with two bottom tracks and two…

The HOPPE AR910 Architectural Mortice Lock Case

By Door Admin / 23 February 2013

Standards and Certification: Quality & Performance: Successfully type tested to all the requirements of BS EN 12209: 2003 Manufactured In Europe by an ISO 9000 Registered Company Fire Safety: Included in a successful fire test to BS EN 1634 Part 1: 2000. For use on a 1 hour fire door CE Marked: Certificate: 1121-CPD-AG0067 Certifire…

Briton Exit Hardware

By Door Admin / 20 February 2013

  Briton have a comprehensive and versatile range of exit hardware that combines the functional needs of safety and security with aesthetic lines.  Briton exit hardware is the ideal choice for all panic and emergency applications including hospitals, schools, hotels, transport hubs, retail and commercial offices. The Briton 1438 (pictured) is a surface mounted rim…

Karcher Door Handles “Designs of Steel”

By Door Admin / 18 February 2013

Aesthetic forms, high quality and innovative ideas – the patented rose construction in Karcher Design door handles and fittings consist of 3 parts and guarantees a surprisingly simple assembly. For the amateur this is precise and safe, while saving the expert time and money. They are fitted and bolted through boths sides of the door, and…

Intumescent strips for fire doors

By Door Admin / 16 February 2013

Fire Regulations require intumescent seals to be rebated into the edge of fire doors to provide passive fire protection. Upon exposure to heat in the event of a fire, the intumescent material swells up to seal the gap between door and frame, this dramatically slows down the spread of the fire from room to room,…