Posts by Door Admin
Has the volcanic eruption in Iceland of Eyjafjallajokull had any impact on your delivery lead times?
Almost all the products we supply are either made in Britain or stocked here in Britain, so there has been very little effect on availability. We are however waiting for a delayed shipment of Projeto 150G glass hangers which were due to arrive by air this week. We are keeping all effected customers updated as…
Read MoreI am using 2120mm high doors (PVC edged – 18mm board) at 560 wide. This is above the max height recommendation of 2m for the ‘twin 60’, will this be ok? As a matter of interest (for future reference) would I be able to use the ‘Jason Bottom Rolling Sliding Door Gear’ for doors of 2120 x 560 (18mm). Again I am aware that the height is well above the recommended 1.5m but I believe that the weight of the doors themselves would be less than the max 25kg stated.
The maximum dimensions of doors for Twin 60 and Jason recommended by the manufacturer Coburn is a guideline only. According to Coburn’s technical department, it was laid down by the original designer of the system and any evidence & reasoning for them has been lost to time. The weight is by far the most important…
Read MoreIdentify an Exidor panic bar assembly?
(from Peter) Q: I need to replace a damaged Exidor panic bar assembly for a Tesco’s store. I do not know which model it is so I have included a photo to help identify it. (from Doorstuff) A: It’s an Exidor 503A-B push bar in Silver, similar to the image below. Contact us for price…
Read MoreWhat finishes do Royde and Tucker H107 Hi-load lift off hinges come in?
The finishes available are bright zinc plate, satin zinc plate, electro brass plate, powder coated, polished chrome, antique bronze, simulated brushed stainless, satin stainless steel and mirror polished stainless steel.
Read MoreCan you tell me what width the stud walls need to be to house the Hideaway pocket kit please?
The finished wall thickness outside the Hideaway pocket door kit will be 115 – 120mm (depending whether you use the packer which comes in the kit or not). This assumes 2 x 12.5mm thick wall boards are used.
Read MoreI’m looking for a door closer for a balcony door that opens out. Since we have blinds on the inside the closer would ideally be on the outside so would need to be weatherproof (very exposed position). Also need a hold open just past 90 degrees. What would you recommend?
To fit a door closer outside on the pull (hinges visible) side of the door is not a problem. Corrosion resistance like this can only be achieved with a “Wetroom” finish. I’d recommend FIRSTLY EITHER:- a Geze TS4000 body only “Wetroom” door closer with a hold open arm in “Wetroom” finish. OR SECONDLY:- you could…
Read MoreIs there a door closer you can use with riser hinges?
You can use any standard arm door closer which has sufficient “play” in the elbow of the arm. It is not an ideal solution, as the door closer needs to be very carefully sited so that the arm does not catch on the top of the door. The shoe of the arm may need to…
Read MoreI’m looking to purchase a door closer for a busy commercial building. It needs to be heavy duty and big and able to handle a weight of 100kg. Do you have anything that would be suitable?
We would recommend either the Geze TS5000 guide rail door closer, or the Geze TS4000 standard arm door closer, both are adjustable power size 1 – 6, with a range of excellent features and suitable for very high usage, heavy duty doors. They are stock items you can buy here.
Read MoreI live in a flat of a converted Victorian house with a grand, big communal front door. Which is slammed a lot! I was looking at these door closers and wondered if you could recommend one? The door closes quite easily when pushed – but obviously we need to be sure that the closer will consistently do that. Any ideas?
A door closer would be a good solution for your slamming problem. For a large door (and width is the most important dimension to consider) you might go for a medium to heavy duty door closer like the TS2000 or the TS2000NV or even the lighter duty TS1500. You can ready about the special features…
Read MoreI am looking to replace a digilock on a panic bar door. However I am interested in one that I am able to deadlock at night once everyone is out of the building. Is there such a thing?
You can use the CL1 outside access device mechanical keypad outside (compatible with an Exidor push pad or push bar inside). This cannot be deadlocked, but it may be possible to add an additional separate deadlock to the door, but you would need to pass this with your local fire officer who will decide based…
Read MoreIs the Projeto 150 sliding door gear available as a ceiling mounted system? We are looking for a system that slides a single leaf 1500w x 2735h x 60 thick door.
Ceiling mounting brackets can be supplied (although these are not the recommended brackets included in the kits). The door size is unlikely to be a problem, as the Projeto can take up to 120kg per door.
Read MoreI currently have a Geze TS1500 door closer on my balcony door, but it does not hold the door open (i.e., door slams shut). I’m confused as to which additional or replacement part I need to keep the door open.
The hold open arm can be subsituted for the standard arm, and can be purchased on our web page, link here.
Read MoreHigh security emergency exit pad/bar for a heavy duty exterior gate?
(from Dale) Q: I’m looking for a high security emergency exit pad/bar that I can fit to a heavy duty exterior gate. Do you have a latch product that would be suitable? (from Doorstuff) A: You might consider the 700 series for heavy duty/ high security emergency exits. See page the page on our website,…
Read MoreI need a digital lock to use on the rear entrance to my building, problem is there’s lots of vandalism at night and I need it to be secure.
Our heaviest duty, most robust digital lock is the Lockey L1150 which has a lever handle with a safety clutch mechanism designed to protect it from excessive force or vandalism.
Read MoreCan a door closer arm be fitted to a curved architrave?
When an architrave has moulding or curved features where the foot of the door closer arm is supposed to go, one usually chisels out a flat surface to screw the shoe on to.
Read MoreI’m looking for good quality panic exit bolts, where are the Exidor ones made?
The Exidor range is designed to a high specification and manufactured entirely in Great Britain, to a system approved to ISO9001:2000. They carry the CE mark and have been mechanically tested to EN179 and EN1125. The Exidor range has also been fire-rated for use on timber and steel doors, approved by Certifire. If you’re looking…
Read MoreNew product launch today!!!
Doorstuff is delighted to announce the arrival of the Exidor 322EC lever operated outside access device in stock. You can buy online here, with discounts available for bulk purchases – see product page.
Read MoreRecommend a fire door closer?
(from Bob) Q: On behalf of the Residents Association for a 2 storey (3 floor) block of flats built in 1968, we are thinking of replacing all of the original flat front doors (which give on to the common stair wells) with fire doors. Can you recommend a suitable automatic door closer for a 30…
Read MoreDoes the Geze T2000NV door closer require a low opening force?
The TS2000 NV offers no special advantage as far as ease of opening is concerned (it’s advantage is it’s adjustability). Depending on the door and the building, we usually recommend a TS3000B slim cam door closer, which is especially suitable for care homes, hospitals & nurseries. It has a guide rail and cam mechanism, both…
Read MoreWe are fitting BRITON 2000 door closers. Would you recommed a door closer to the same spec?
Broadly speaking, the Geze TS2000 door closer family are similar specifications, with each model having it special features. BRITON 2000 door closers are also a family.
Read MoreNew product added to site!
We’re pleased to announced the addition of Geze TS3000V guide rail door closers to the web site. Buy online along with all components and spares, including replacement guide rails, covers, mounting plates etc.
Read More