Blog

What is the backset of a lock or latch?

By Door Admin / 12 October 2013

The backset is the distance from the front of the lock to the centre of the spindle as shown above.  If you intend to use new locks on an existing door, replacing your old ones, you will need to ensure the new lock fits into the existing hole in the door.  To do this, measure…

Heavy duty Lockey 1150 digital locks – in stock at Doorstuff

By Door Admin / 4 October 2013

With a magnetic deadbolt, 14 press buttons and over 7,000 combinations, this heavy duty lever operated mechanical digital lock offers simple operation combined with a robust but stylish design making the 1150 the ideal system for areas in heavy use.  The handle has a safety clutch mechanism to protect the lock from excessive force or vandalism.…

Fixing heights for pull handles to meet BS8300:2009

By Door Admin / 24 September 2013

The original BS8300 described the principles for door furniture.  Although the intention was for guidance and demonstration purposes only, in reality many specifiers and manufacturers alike have been unwilling to stray beyond the dimensions and shapes actually shown.  Consequently pull handles have invariably been 425mm high, round bar design. The revised guidance moves away from fixed…

Karcher heavy duty safety lever handles perform in demanding situation

By Door Admin / 16 September 2013

  Karcher lever handles are renowned for their longevity under duress, and this has proved to be the case as they continue to perform to a very high standard in a local Devon maintained special school for students who experience Social, Emotional and Behavioural Difficulties (SEBD) where ER27 ‘crete’ safety lever handles were supplied by us…

How to change the handing of a HOPPE escape sashlock (AR915)

By Door Admin / 12 September 2013

  1. Latch reversibility:  To reverse the latch bolt insert a screw driver through the hole in the back edge of the lock case, push the slotted head forward firmly and rotate. 2. Escape reversibility:  To reverse the escape function remove the follower plate with a small blade, swap it to the other side of the…

“Heavy Duty” is not a subjective term – how to be sure you’re buying quality door handles

By Door Admin / 5 September 2013

  The term “Heavy Duty” is no longer subjective, there are EN standards which define the use and durability of each product. A suite of European product performance standards (ENs) have been developed for most building components, these include a comprehensive range of product performance standards for architectural hardware. Products are ‘marked’ with a six…

Karcher Door Handles “Designs of Steel”

By Door Admin / 18 February 2013

Aesthetic forms, high quality and innovative ideas – the patented rose construction in Karcher Design door handles and fittings consist of 3 parts and guarantees a surprisingly simple assembly. For the amateur this is precise and safe, while saving the expert time and money. They are fitted and bolted through boths sides of the door, and…

Enabling and Disabling an External Door Handle For Security

By Door Admin / 14 March 2012

Q: Our local club has an external opening emergency exit door which is fitted with an Exidor panic bar on the inside. Externally there is no way of opening the door and due to the door opening to an external smoking area we would like to fit some sort of hardware whereby the external handle can…

I am looking for interior door locks for the doors in my house to help control room access to my autistic son. Can you advise me please?

By Door Admin / 8 January 2012

We can suggest using “keyed alike” 3 lever locks on your internal doors – this would mean you would only need to carry around one key and it would operate all the locks (although they come with 2 keys each, the keys are all the same).  You may want to look at compatible door handles…

Q: Choosing ironmongery for four final fire exit doors and frames which will experience heavy traffic, and need to be secure (would prefer not to have a panic bar), can you recommend a handle arrangement, perhaps with a thumblock on the inside, that would be suitable for these circumstances?

By Door Admin / 21 October 2011

A: For the arrangement you describe we would suggest using escape sashlocks – these have euro cylinder thumb turn locks (i.e. you can have any kind of high security, master keyed, anti pick, anti bump etc euro profile cylinder) but use a split spindle so from the inside the handle will ALWAYS over-ride the lock…

What is meant by “bolt through” door handles?

By Door Admin / 16 June 2011

Bolt through door handles are the best way to ensure the handles don’t get pulled off in high use settings like schools & offices.  Usually only available on round roses, the bolts go straight through the door AND the lock case or the latch.  It’s essential to check the locks and latches are suitable for…

Winner announced of our April 1st “Most Creative Interpretation of Fire Regulations” Award

By Door Admin / 31 March 2011

Note the canny use of the fire bucket.  And the DDA compliancy of the pull handle (i.e. none).  Thank you to the fire officer who noticed this door at their kid’s school parents evening for sending us this photo. Do you have a better one?

What is a “back-to-back” pull handle?

By Door Admin / 24 March 2011

When pull handles are needed on both sides of a door – for example a double action door which swings both ways – back-to-back pull handles are purchased in sets.  The bolts pass through the door and fix into the handle on the other side using a grubscrew hidden on the underside.  This method makes…

What is the difference between an ‘Escape’ Lock and an ordinary lock?

By Door Admin / 16 March 2011

The Euro Mortice Escape lock(opens in new tab) shown on the website uses a split spindle which allows the door to be opened from the inside even if the door is locked from the outside. The standard Mortice lock uses a standard 8mm spindle and does not offer this function. The Mortice Escape lock can…

The handle description says the handle sets are “bolt through fixing”, what does this mean?

By Door Admin / 13 March 2011

Door handles can be subjected to a lot of force which, over time, can loosen and wobble them free.  Bolt thru’ fixing is the best way of fitting lever handles(opens in new tab) for a long, maintenance-free life span.  Essentially, the bolts holding the handles onto the door pass right through the door AND the…

Q: Do you only do silver flush pull handles for pocket doors as I’m looking for brass or gold fittings?

By Door Admin / 22 January 2011

A: We stock the rectangular flush pull handles in polished brass finish, priced the same as the stainless steel ones pictured here.

I have a fire door in a specialist nursing home caring for vulnerable adults which…

By Door Admin / 20 January 2011

…needs to be opened on a regular basis to allow access for staff but which also needs to discourage the residents from using it, for their own safety.  Therefore it needs to be secure but easily opened daily and opened by anyone in an emergency. Have you any suggestions please? This situation can be addressed…

I am unsure which lockcase to purchase for my door handles I am looking order door handles for my new doors, S103 mitred lever BSS/PSS and matching bathroom lock set but could you please let me know which lockcase I need?

By Door Admin / 17 January 2011

You can order the “S103 bathroom set, Duel” (which includes the door handles, bathroom indicator set & bathroom lock case(opens in new tab)), just select 44mm (or 57mm) for the backset dimension – the usual for domestic doors(opens in new tab) is 44mm, and as they’re new doors you have no pre-cut holes to measure.

We need a door lock which is permanently open on the inside but locked outside?

By Door Admin / 9 January 2011

With the limited information given in the question, we might suggest either an escape sashlock set(opens in new tab), or a fire escape push bar(opens in new tab) or push pad, both will perform that function but which is most suitable will depend on the usage of the door.  You can see information about both…

Q: Will the snow effect my delivery?

By Door Admin / 21 December 2010

(21 Dec 2010) Doorstuff Statement: After being snowed-in yesterday, only Tuffnells are collecting from us today, so there are limited dispatches.  While UPS and Tuffnells are doing their best to get our deliveries to you on time, they are at the mercy of the winter roads.  We will keep you updated here about our weather…

I am looking for a long bar handle of good quality to use on a glass sliding interior door, do you have anything suitable?

By Door Admin / 4 December 2010

We do brushed stainless steel back-to-back pull handles in either the “D” shape or the “guardsman” design (also known as “T” bar handles) suitable for frameless glass doors, in a range of sizes.  You can see the prices at the link there (scroll down to nearly the bottom of the page).