Blog

Doorstuff talks to Homebuilding & Renovating magazine

By Door Admin / 12 July 2013

  Doorstuff’s very own Helen Butland is interviewed by Claire Lloyd in the August 2013 issue of Homebuilding & Renovating magazine for their article about pocket doors.  With a selection of lovely photos of pocket doors in situ, Claire writes about the benefits of designing in a pocket door when rooms are short of space. …

Sliding door gear stock holding boost

By Door Admin / 23 May 2013

  This weekend we installed our newest bank of heavy duty racking which has effectively quadrupled our stockholding capacity for the five metre and six metre tracks of sliding door gear.  The result is our increased ability to supply ex-stock the widest range of sizes and specifications of sliding door kits and components for the…

NEW!!! Bottom rolling kit for wardrobes up to 3m wide

By Door Admin / 28 February 2013

Introducing the SAHECO SF-25 sliding door gear for wardrobes and cabinets in a range of kit sizes from 1 to 3 metres in width. Sturdy and smooth running, the SF-25 replaces the COBURN Jason in our range, and brings with it advantages of design, flexibility and track length. Comes with two bottom tracks and two…

Frameless glass sliding door cabinets

By Door Admin / 9 November 2012

Ideal for trophy cupboards and shop display cabinets, the Henderson Zenith sliding door gear is a cost effective and smooth running kit to get your glass panels sliding. There are 3 kit sizes available: 1200mm, 1500mm or 1800mm, each suitable for two doors of 6mm thickness glass. You can now find our sliding door products on our…

The Rollan sliding door gear kit comes with short metal floor guides…

By Door Admin / 20 July 2012

…which are designed to be used in conjunction with a groove which you have to mortice into the bottom of the door.  If the door doesn’t travel more than it’s own width, then manufacturer Geze’s invisible Rollan floor guide is the best & most elegant thing to use:-

We recently bought your R40.16 timber sliding door kits up to 40kg, but we’ve changed the doors to heavy pine ones as they’re going to have regular use. Do you have anything suitable?

By Door Admin / 14 March 2012

For doors up to 80kg each in weight, you can use the same track as the R40 that you already have, and buy the Rollan 80 extra door packs, this will give you the wheels etc to run in the tracks, which are strong enough to support your doors.  If the doors are more than…

What is the floor guide for the Geze Rollan & Perlan sliding door gear like?

By Door Admin / 16 February 2012

Imagine an upside down capital “T” shaped peice of metal, about 1.5″ long, which is screwed to the floor or threshold, a groove is morticed into the bottom of the door and the door slides back and forth on the guide – never seen, nothing to trip on or collect dust.  Here’s a photo:  

I’m after some door runners for a custom made door. The runners will need to be 2 metres wide. The weight of the door will be roughly 40kg. It is not a pocket door, just sliding across the wall. Is there also a way for the door to stop it slamming against the walls?

By Door Admin / 10 February 2012

We do the economical Rollan 40.24 which is suitable for doors up to 40kg.  If you want to go for something which closes the door softly at each end (and your door is at least 840mm wide), we recommend the Perlan SoftStop double draw-in, 2050mm track.  Tracks can be cut down to length.  Links to…

I am looking for floor gliders for double sliding wooden doors. We are replacing the old doors and have the track but are missing the gliders.

By Door Admin / 7 February 2012

It is likely that the gliders we supply will be different to those on your existing doors.  The only ones we do similar to your description are the white plastic slides which are used with the BK2 and BK4 bottom guide kits, and they can be bought in pairs for £1.25 per pair (+ postage &…

Do I need door stops for a pocket door system, or are they included in the kit?

By Door Admin / 27 January 2012

Our iMpero pocket door system DOES come with stops in the track, so that’s how you control the door on maximum opening.  And the Hideaway pocket door kit comes with a rubber buffer which you attach to the back of the door.

I’m planning to fit 3 sliding-folding doors to break up a through room. Full height internal wooden doors up to 40mm thickness with glass panels, can you recomend a door kit or the parts required?

By Door Admin / 27 January 2012

Probably the best solution is the Foldaside 240 system You could use either the hinges or pivoted systems but the hinged system requires the first door (the one attached to the frame) to be 29mm plus half the door thickness shorter than the other doors. If you already have equal width doors you would need…

I am looking for some tracking to fit four 30″ wardrobe sliding doors. Do you have any, I need it in one length?

By Door Admin / 15 January 2012

With 4 wardrobe doors of 30″ width, I estimate you’re looking for about 3 metres of track. The SAHECO SF-30 or SAHECO SF-53 would be the best systems – which one will depend upon the weight of the doors, they both come up in a variety of kit / track lengths.  You might go for…

Your frameless glass pull handles, can they be used on 6mm thick glass/polycarbonate?

By Door Admin / 10 January 2012

They are suitable only for glass (or polycarbonate) of 8, 10 or 12mm thickness, or somewhere in between, and would not tighten enough to use on 6mm thickness.

What Sliding Door Goes Seamlessly Back into the Wall?

By Door Admin / 7 January 2012

From this description, it sounds as if you’re looking for a pocket door system, where the door slides back into a cavity in the stud walling like this photo?  We supply two different basic designs of pocket doors – the Hideaway and the iMpero.  You can have a look at them on our website at the…

How much wall space does a Hideaway need?

By Door Admin / 7 January 2012

Q: I’ve ordered a Hideaway pocket door system today, but before it arrives tomorrow I need to know how much space to leave in my wall for the whole thing to fit in? A: You need to allow 2 x (door width) + 1 inch.

Secret POCKET DOOR discovered in Skyrim!

By Door Admin / 23 December 2011

As a bit of Christmas fun, we thought we’d share the discovery of a secret POCKET DOOR behind a wardrobe in the Sleeping Giant Inn, Riverwood, Skyrim.  To find it you’ll have to be on the quest for the “Horn of Jurgen Windcaller”, but if you fancy having one in your own worldly abode, you…

Introducing the Terra 120G bottom rolling sliding door gear for frameless glass

By Door Admin / 22 December 2011

  An Italian style designer bottom rolling sliding door kit for frameless glass doors. The satin stainless steel half-moon shaped track comes pre-drilled in 2m and 4m lengths and can be cut down. Rubber covered rollers give a smooth quiet action. The sliding door kit comes complete with track, single wheel rollers, full length top…

Fixed panel / sliding panel for frameless glass

By Door Admin / 26 November 2011

We are proud to announce stock has arrived of Geze Perlan Fixed panel / sliding panel gear for frameless glass. Ideal for use as office partition doors, retail office areas, and in the home as a modern room divider. Sold as standard in 3m long kits to accomodate one sliding panel and one fixed panel, but easily…

Please advise on the sliding folding doors we want to use them on external 3 x 4m is there a way of waterproofing them? And can these be without wood, just glass?

By Door Admin / 21 November 2011

The only door kits we do which include weather seals for external doors are the TIWI sliding & folding doors.  However it is for timber framed doors only, glazed is OK.  We don’t know of a standard kit for this job, we think you’ll have more luck with a bespoke architectural glass supplier.

If I need a heavier duty roller would I be looking at the R80.24? To support the bottom of the door can you please confirm what parts I need, I’ve been looking at the BK4?

By Door Admin / 2 November 2011

Yes, the R80 can take up to 80kgs per door, all the weight is taken by the top track & carriage.  If you want a full length floor guide, you can use the BK4 Bottom guide kit with it.  The Rollan kit does come with short metal floor guides, which are designed to be used…

Q: Can a Hideaway pocket door kit be fitted from one side of a plasterboard stud partition?

By Door Admin / 29 August 2011

A: Yes, it is possible to fit a Hideaway pocket door system from one side only, we are aware of customers who have done this successfully, although your finished wall thickness will be slightly more than the 115 – 120mm shown in the specifications.  How easy the project is may depend on what you find…