Blog
A: Yes, the Jason sliding door tracks are easy to cut down with a junior hacksaw.
There is no sound insulation material supplied with either pocket door systems we supply (the Hideaway and the iMpero deluxe), but it would be possible to add your own brush strip to the top and bottom of the doors, although this wouldn’t look right on the leading edges. The wall cavity is going to be…
The Foldaside 100 kits are supplied with flush bolts to keep the doors in place when open flat. The 4 door kit comes with 2 flush bolts which would be positioned at the top of the doors, possibly the end of leaf 1 & 3 (or 2 & 4) and either bolted into the track,…
As we cover the entire country, we suggest you look at the trading standards “Buy With Confidence” website and use their trader search to locate a glass supplier near to you. Companies who appear on the Buy With Confidence site are audited by trading standards and are therefore reputable.
Q: How do I determine the overlap required for the door compared to the opening for my sliding door?
A: It is an aesthetic decision, but perhaps between 20mm and 100mm each side. Slightly more overlap might be prefereable, as this may help reduce noise transference between the rooms. The dimensions of your existing architrave and skirting boards will affect the distance off the wall that the door will run, so bear in mind…
The Perlan is the best of our German sliding door gear, with the nylon wheels and aluminium track, it runs nice and quietly. The Projeto 150 runs quietly too, but all sliding gear will make a low “rumble” which resonates more or less depending on the wall construction (brick/stud) and if you have carpets or…
A: Looking at the Foldaside 100 – 4 door 2400mm kit, the top and bottom tracks can be alternatively purchased by the metre (i.e. in 3m sections, which you could cut down). But if your opening is 2.44m, then it may be possible to get away with 2.4m tracks by positioning the 4cm “gap” at…
Used on double doors sliding on one track, meeting together in the middle and opening to give a wide access space, the doors are connected to each other via a toothed belt so that, when one door opens (or closes) the other door mirrors it automatically, so the doors open together and close together, but…
Q: I am interested in the Twin 60 door runners I need to run 3 doors on 2m of sliding door track. Your info states maximum door height is 2 metres. My door height would be 2.110 metres. Can you please tell me if they will work at that height, if not is there an…
Although it is not designed this way, the BK4 surface mounted floor guide could be recessed into a groove on your floor.
…The aperture is 2.75mx1.4m – its a strange half-height recess. I would like to fit a slider mechanism in to the concrete block at the top and suspend 2 or 3 frameless glass panel doors which slide across each other. I have a builder who can fit this for me, but might need some advice.…
The Rollan 40 sliding door gear would be ideal for your doors, as long as they are under 40kgs in weight. (Otherwise go up to Rollan 80.) There is no pelmet system which is designed for use with the Rollans, but it may be possible to make some yourself with wood. The Perlan 140 has…
A: We stock the rectangular flush pull handles in polished brass finish, priced the same as the stainless steel ones pictured here.
The weight for a solid pine door with dimensions 800 x 2100 x 33mm thick would be approximately 32 kgs, if your doors are similar in size to this, the Rollan 40 system would be the one to go for. If your doors are larger, telephone us with the details and we’ll work out the…
With the iMpero there is access built-in to do that, the Hideaway cannot be used with frameless glass. In fact it is recommended that you fit the gear first, so you can measure the exact size of glass to buy, perhaps by making a template from chipboard.
If you’re using double doors to part and slide alongside a wall either side of the opening, and the opening has architrave/frame protruding, the doors will have to pass that and thus will stand out further than otherwise. The wall brackets which come in the Rollan kit do not act as spacers, and so you…
…the runners are now worn and need to be replaced. There is an aluminium trim around each door and the bottom one contains a pair of units containing the runners. The existing runners have given 25 years service and both the manufacturer and retailer are out of business. My idea is to simply replace the…
There is no limit to the thickness of the door, within reason. If the door is too wide, then all you would need to do is add a wooden baton between the track and the wall, as a spacer. The thing to be aware of is the 40kg weight limit, if the door is thicker…
The problem with most large/projecting disability handles is that they won’t suit pocket doors without severely restricting closure of door and hence clear opening size. We don’t have space to make the door wider to compensate. Is there anything suitable? We supply a pocket door bathroom lock set, which includes a mortice lock for the…
(21 Dec 2010) Doorstuff Statement: After being snowed-in yesterday, only Tuffnells are collecting from us today, so there are limited dispatches. While UPS and Tuffnells are doing their best to get our deliveries to you on time, they are at the mercy of the winter roads. We will keep you updated here about our weather…
Q (from Angela) We wish to fit a glass sliding door in our hallway but don’t want a track going across the floor, do you have anything that could be used? A: The frameless glass sliding door systems which we do, the Geze Rollan 80G, the Perlan 140G, the Perlan SoftStop Glass and the Projeto…