Blog

I am looking for a long bar handle of good quality to use on a glass sliding interior door, do you have anything suitable?

By Door Admin / 4 December 2010

We do brushed stainless steel back-to-back pull handles in either the “D” shape or the “guardsman” design (also known as “T” bar handles) suitable for frameless glass doors, in a range of sizes.  You can see the prices at the link there (scroll down to nearly the bottom of the page).

I need a three panel folding/sliding door, or four panel if three is not possible. The opening is 1.0 mtr wide x 1.85 mtr high. Have you runners that will do this? I can make the doors myself.

By Door Admin / 1 December 2010

As long as your individual door leaves will weigh no more than 7kg each, then I would recommend the Henderson Bi Fold B15 – 4 door kit, which you can cut down to fit the opening.  You can read about it and see the price at the link.  If your doors will be heavier, then…

Recommend a wardrobe sliding door kit for my doors?

By Door Admin / 22 November 2010

Q: (from Dennis) I have two doors measuring 6 foot x 21 inches 3/4 inch thick which I want to slide past each other like a in wardrobe on double tracks top and bottom.  They are 15kgs each and 16mm thick.  Would your kit be suitable? A: Yes, the Coburn Jason 4J can take doors…

I’m currently detailing a sliding door using the Projeto 150 system and was wondering if you have the dimensions of the floor mounted guide for the timber door as it seems to be the only element not dimensioned on the pdf?

By Door Admin / 21 November 2010

The door stops for the Projeto 150 are on the track itself, not the floor, and included in the kit.  The dimensions of the floor guides are 19.8mm width x 51mm length x 17mm tall.  You mortice a groove in the bottom of the door so it runs along the floor guide.  They are 304…

I’m looking for wardrobe sliding door gear with a length of 2900mm to take three doors (MDF) running on two tracks. One door at rear with two at front. Any ideas please?

By Door Admin / 20 November 2010

As long as your individual doors are less than 25kg each in weight, then you can choose between the Coburn Jason bottom running wardrobe gear (you’d need to order 2 kits to get the length) or the Coburn Twin 60 top hung wardrobe gear (again the longest kit is 2.4m, so you’d need 2 kits…

I am looking for a sliding folding concertina door system to fold 8 x narrow doors , 4 each way. Doors are 2200 mm x 235 mm x 35 mm in size and weigh approx. 20 kg each. I will need a system which has both top and bottom tracks – 2100 mm in length.

By Door Admin / 15 November 2010

The suitable gear for the sliding folding arrangement you describe for your doors would be the Coburn Foldaside 100, (see components listed on our web page at the link shown) a set to do all 8 doors on a 2.1m top & bottom track will have to be bought in component form, with two 4…

Q: Do I need to use the cavity widening kit with the H30 Hideaway pocket door?

By Door Admin / 21 October 2010

A: (from Doorstuff) You only need to use it if the door is between 36 and 44mm thick.  Without the cavity widening kit, your finished wall thickness will be 115mm, however you can use the cavity widening kit to increase your finished wall thickness to 120mm whilst using a 35mm thick door (all based on…

Interested in your Projeto 150G sliding door kit. Could you recommend a firm to make the actual frameless glass doors?

By Door Admin / 2 October 2010

We don’t make the glass itself, we suggest you try your local glass supplier.  National companies that can supply glass made to measure would be Pilkington and Glassolutions.  We can supply a drilling diagram for the glass people.

I am trying to find a sliding wardrobe system that would allow me to have sloping doors to fit in a dormer window. Either a front mounted system I could fit to a shelf within the wardrobe or a floor mounted system?

By Door Admin / 25 September 2010

The sliding door gear we would recommend for your situation is the Coburn Jason, it has wheels running on a track at the bottom and a top track to act as a guide.

When using a Rollan sliding door kit to convert a standard timber door to sliding, how best do I create the groove in the door for the standard fixed floor guide?

By Door Admin / 18 September 2010

The best tool for morticing the groove is a router – short & sweet!

Would the Foldaside 100 system be OK for my doors: I want to have two doors sliding/ folding to one side, each door weighs approx 23 kg and is 600 mm wide?

By Door Admin / 11 September 2010

Yes, the Foldaside 100 would be fine.  Because your doors are at the maximum width you definitely need to use the floor guide (which is supplied in the 2 door kit).

What & where to buy: Doors to suit Hideaway pocket door gear?

By Door Admin / 9 September 2010

The H30 is the pocket door gear only and you will need to supply the door itself.  Any normal timber door/glazed timber door will be suitable, as long as it’s up to 760mm wide x 2032mm tall x between 35mm and 44mm thick and 56Kgs maximum weight.  These dimensions make it a standard domestic door,…

A lock for sliding wardrobe doors?

By Door Admin / 3 September 2010

Q: (from John) I need to lock some sliding wardrobe doors.  How can I do it? A: (from Doorstuff) The only solution we can offer is to use a 3 lever mortice sliding door lock, see that link.

A curved floor guide for curved sliding doors?

By Door Admin / 1 September 2010

Q: (from Clare) The company I work for recently installed two semi-circular “pods” or freestanding meeting rooms. The doors are sliding and are held onto the frame by the top track, but when you open and close them there is some sideways movement which makes them feel unstable.  I was therefore wondering whether the BK2…

I require a spare part for wardrobe sliding door. It is the wheel mechanism. Unsure about make of wardrobe as in house when we bought house, please see photo below.

By Door Admin / 7 August 2010

Thank you for the photo.  Unfortunately the wheels are not from one of our sliding systems (Geze, Coburn or Projeto).  Perhaps if you send this photo to other sliding door companies, someone will recognise them and may be able to supply spare parts.

Q: Would it be possible to adapt your Hideaway system to incorporate a glass door?

By Door Admin / 29 July 2010

Unfortunately there are no compatible glass clamps available for the Hideaway system.  The two alternatives you might consider are the iMpero pocket door system buying additional glass clamps (+ probably the timber jambs for glass doors), OR buying a Rollan 80G or Perlan 140G sliding door kit for glass and constructing your own cavity supports…

Q: Please can you confirm if you have any sliding door kits that are suitable for a kitchen. In particular I am concerned that a kitchen door is normally a fire door. Do sliding doors meet the safety/building requirements for use as a kitchen door and if so which kit should I use?

By Door Admin / 6 July 2010

A: The only fire rated sliding door gear we can offer is the iMpero pocket door fire door kit.  A “normal” (i.e. non-pocket) sliding door could not ever meet fire regulations because of the inevitable air spaces between the wall and the door.

I’m looking to divide up two rooms in my house. At the moment I have an opening in a studded partition wall 1375mm wide by 2055mm high. My question relates to the Hideaway pocket door system; is it possible to retro fit the system to a wall which is already completed or can it only be fitted to a frame specially built to suit the system?

By Door Admin / 4 July 2010

It is possible to retro fit a Hideaway kit by opening the stud walling on one side only, but how much work this will be will depend on what you find inside the wall in terms of the structure already there.  In terms of width you’ll need (2 x door width) + 1 inch.

Customer Query: Sliding Door Systems

By Door Admin / 23 June 2010

“I have built 2 wardrobes, originally I was intending to hang 2 x 444mm doors on each carcass using standard sprung hinges. Unfortunately, this would leave no space between the wardrobe and the bed, therefore I am now looking at a sliding door system. I need a system which will fulfill my dimensions and provide…

I work for a housing association and I am trying to source a privacy lock for an internal, wooden bi-fold bathroom door. What can you suggest?

By Door Admin / 5 June 2010

We supply a mortice bathroom lock for a sliding /folding door which is used in conjunction with a normal bathroom indicator & thumbturn.  It works by splaying out the latch bolt behind the keep.  You can buy them both on our website at the link here, just scroll to the section “Locks and bolts for…

Do you also do sliding front doors for flats? The main door into my building is fine, but the door into my individual flat takes up a lot of the hall space when it opens! Do you sell sliding doors that would be safe and secure enough to be suitable for use as a front door, as that would help me immensely.

By Door Admin / 27 May 2010

Unfortunately neither the sliding door gear nor pocket door gear we supply would be secure enough to use on a front door – the only sliding door locks we supply are 3 lever, so your insurance company wouldn’t rate them either (should be a 5 lever BS rated minimum).  Actually we don’t think you ought…