Blog

Turning a Cupboard Door into a Sliding Door

By Door Admin / 10 May 2010

Q: I have a 60cm width cupboard door in bedroom I’d like to make into a sliding door to save space. Please could you advise me if any of your sliding gear is suitable for this job? A: If the door is less than 9 kgs in weight you could use a Coburn Hush kit,…

I am thinking of getting the Hideaway pocket door system, how easy is it to install?

By Door Admin / 2 May 2010

If you would like to watch a video of the installation made by the manufacturer, you can watch it: click here.

I want to order a track for a set of double wooden interior sliding doors but I only seem to be able to find sets with enough pieces for one door. How do I get the extra hangers, floor guide etc?

By Door Admin / 29 April 2010

We assume you are looking at the Rollan or Perlan sliding door gear, and making a double sliding door set?  You’ll simply need to buy an extra door pack, listed under the components on each page.

Q: What is the best product for a recessed sliding door i.e. one that is concealed within a partition wall, I will be using a 24″ x 78″ door?

By Door Admin / 27 April 2010

A: We supply two designs of pocket door gear, the iMpero pocket door gear is the best one as far as wall reinforcement, engineering of mechanism, range of sizes, optional extras etc are concerned, and the Hideaway is the best one if you’re on a tight budget, still well made and versatile. Both can be seen…

Regarding Hush sliding door gear, is the quoted weight per door or the total of a pair?

By Door Admin / 26 April 2010

Thank you for your enquiry. The weight limit on the Coburn Hush is per door.

I have a wardrobe made in Germany (no name), one of the door wheel runners has broken, it is 2.1/4″ diameter, could you assist please?

By Door Admin / 23 April 2010

We can only supply sliding door spares (in the form of extra door packs) for sliding door gear made by Geze (who are German) and Coburn (who aren’t).  Unless your sliding door gear looks exactly like that shown in the illustrations on our website, we will not be able to help.  See the link here…

Has the volcanic eruption in Iceland of Eyjafjallajokull had any impact on your delivery lead times?

By Door Admin / 22 April 2010

Almost all the products we supply are either made in Britain or stocked here in Britain, so there has been very little effect on availability.  We are however waiting for a delayed shipment of Projeto 150G glass hangers which were due to arrive by air this week.  We are keeping all effected customers updated as…

I am using 2120mm high doors (PVC edged – 18mm board) at 560 wide. This is above the max height recommendation of 2m for the ‘twin 60’, will this be ok? As a matter of interest (for future reference) would I be able to use the ‘Jason Bottom Rolling Sliding Door Gear’ for doors of 2120 x 560 (18mm). Again I am aware that the height is well above the recommended 1.5m but I believe that the weight of the doors themselves would be less than the max 25kg stated.

By Door Admin / 16 April 2010

The maximum dimensions of doors for Twin 60 and Jason recommended by the manufacturer Coburn is a guideline only.  According to Coburn’s technical department, it was laid down by the original designer of the system and any evidence & reasoning for them has been lost to time.  The weight is by far the most important…

Can you tell me what width the stud walls need to be to house the Hideaway pocket kit please?

By Door Admin / 10 April 2010

The finished wall thickness outside the Hideaway pocket door kit will be 115 – 120mm (depending whether you use the packer which comes in the kit or not).  This assumes 2 x 12.5mm thick wall boards are used.

Is the Projeto 150 sliding door gear available as a ceiling mounted system? We are looking for a system that slides a single leaf 1500w x 2735h x 60 thick door.

By Door Admin / 20 March 2010

Ceiling mounting brackets can be supplied (although these are not the recommended brackets included in the kits).  The door size is unlikely to be a problem, as the Projeto can take up to 120kg per door.

Customer Query About Replacing a Damaged Mirror Wardrobe

By Door Admin / 5 December 2009

Q: The bottom track of my mirror wardrobe doors has recently snapped and I am try to locate a replacement. There are no manufacture’s markings. Would your BK4 product (lower track) provide the answer? My doors have metal grooved rollers that run on plastic/nylon track. Does your BK4 track come in sections longer than 2m,…

I need a heavy duty overhead running track with trolley wheels to hang a door 1850 wide x 2750 high. Door weight is approximately 130kg. It will have a softwood frame with one single piece of 10mm toughened glass. What do you recommend?

By Door Admin / 12 October 2009

You may be interested in our Perlan sliding door gear which can take doors of up to 140kgs each.