Blog

We need a door lock which is permanently open on the inside but locked outside?

By Door Admin / 9 January 2011

With the limited information given in the question, we might suggest either an escape sashlock set(opens in new tab), or a fire escape push bar(opens in new tab) or push pad, both will perform that function but which is most suitable will depend on the usage of the door.  You can see information about both…

What door thickness can the Rollan 40 sliding door gear handle?

By Door Admin / 7 January 2011

There is no limit to the thickness of the door, within reason.  If the door is too wide, then all you would need to do is add a wooden baton between the track and the wall, as a spacer.  The thing to be aware of is the 40kg weight limit, if the door is thicker…

Door hardware for a sliding pocket door to a disabled wc which would comply with Doc M/disability guidelines?

By Door Admin / 5 January 2011

The problem with most large/projecting disability handles is that they won’t suit pocket doors without severely restricting closure of door and hence clear opening size. We don’t have space to make the door wider to compensate. Is there anything suitable? We supply a pocket door bathroom lock set, which includes a mortice lock for the…

Q: Using Geze TS2000 door closers in the figure 66 position

By Door Admin / 4 January 2011

I am trying to select some door closers for my scout hut. I have exterior double doors that open outwards so need a figure 66 type as shown in your diagrams.  Does the Geze TS2000 NV + BC come with the brackets necessary for this  please (I have a deep door frame head).  Also does…

Our office is fitted with GEZE TS1500 door closers throughout…

By Door Admin / 1 January 2011

…on one of them the bolt (the one with ratchet-type notches around the head) which goes through the arm and into the rectangular device has broken in two. Can you supply a replacement bolt please, for what is otherwise a perfectly good piece of equipment? There is available a screw pack for the TS1500 which…

Q: Will the snow effect my delivery?

By Door Admin / 21 December 2010

(21 Dec 2010) Doorstuff Statement: After being snowed-in yesterday, only Tuffnells are collecting from us today, so there are limited dispatches.  While UPS and Tuffnells are doing their best to get our deliveries to you on time, they are at the mercy of the winter roads.  We will keep you updated here about our weather…

Is an Exidor OAD available with a Lever Handle?

By Door Admin / 14 December 2010

The 200/300 series now offers the 322 lever OAD. The 500 and 700 series both have lever handle OAD’s available, which can be used with single point latches, 2, and 3 point locking Bolts and Pullman Catches.

A sliding glass door with no track on the floor?

By Door Admin / 10 December 2010

Q (from Angela) We wish to fit a glass sliding door in our hallway but don’t want a track going across the floor, do you have anything that could be used? A: The frameless glass sliding door systems which we do, the Geze Rollan 80G, the Perlan 140G, the Perlan SoftStop Glass and the Projeto…

Why can a 410 OAD not be used to operate a 297 / 296 Panic Latch or a 294 Panic Bolt?

By Door Admin / 7 December 2010

Because the mechanism on the 200 series units operates in one direction only and the amount of travel is limited. Therefore the lever handle would not fully retract the bolts and latches and would also not operate downwards in a normal manner. Also, all accessories need to be listed on the Manufacturers Declaration of Conformity,…

Can I use an OAD from the 200 / 300 series with the 400 series Touch Bar Range?

By Door Admin / 4 December 2010

No, because the bolt-through fixing positions are different. Also the 410 OAD from the Touch Bar range can not be used with the 200 / 300 series range because the mechanism only rotates in the one direction. All accessories need to be listed on the Manufacturers Declaration of Conformity, and using any accessory not listed…

I am looking for a long bar handle of good quality to use on a glass sliding interior door, do you have anything suitable?

By Door Admin / 4 December 2010

We do brushed stainless steel back-to-back pull handles in either the “D” shape or the “guardsman” design (also known as “T” bar handles) suitable for frameless glass doors, in a range of sizes.  You can see the prices at the link there (scroll down to nearly the bottom of the page).

I need a three panel folding/sliding door, or four panel if three is not possible. The opening is 1.0 mtr wide x 1.85 mtr high. Have you runners that will do this? I can make the doors myself.

By Door Admin / 1 December 2010

As long as your individual door leaves will weigh no more than 7kg each, then I would recommend the Henderson Bi Fold B15 – 4 door kit, which you can cut down to fit the opening.  You can read about it and see the price at the link.  If your doors will be heavier, then…

Do you supply a 24V door hold open/closer for connection to a fire alarm that can be left open in various positions?

By Door Admin / 29 November 2010

Yes, we do supply a door closer which can allow a fire door to be left ajar, or open at any angle, while connected to the fire alarm system – it is called a Geze TS4000 EFS, and you can read all about it, including the prices, at the link.

Doorstuff Approved as Member of Trading Standards’ Buy With Confidence Scheme

By Door Admin / 26 November 2010

Following a recent Trading Standards Audit performed by Devon County Council, Doorstuff Ltd has been accepted as a member of the Buy With Confidence scheme. The scheme provides consumers with a list of local businesses which have given their commitment to trading fairly. In order to become a Buy With Confidence member, a business must…

Is there panic hardware for INWARD opening doors?

By Door Admin / 26 November 2010

Q: (from John) We have a fire exit door that opens inward and we require to fit a lock that can only work from inside the building, do they make such a thing? A: The Exidor 500 series(opens in new tab) can work on pull-to-open fire escape doors (as well as the more usual push-to-open).  This…

Help! Our door closer slams the door

By Door Admin / 24 November 2010

…My freeholder has just fitted a door closer at my request as the main door slams when people close it. However, the one they have fitted has not remedied the problem as the door needs to be closed very gently to eliminate the slam (and rattle of glass in the door).  Do you have a…

Can the cylinder in an OAD be interchanged?

By Door Admin / 23 November 2010

The Exidor range includes Outside Access Devices (OAD’s) with interchangeable and non-interchangeable cylinders. All the Exidor OAD units, except for the 298 and 409 units, have interchangeable cylinders. The cylinders in the 302 OAD have to be drilled and tapped from the back, but the 322, 400, 500 and 700 series OAD uses the conventional…

Recommend a wardrobe sliding door kit for my doors?

By Door Admin / 22 November 2010

Q: (from Dennis) I have two doors measuring 6 foot x 21 inches 3/4 inch thick which I want to slide past each other like a in wardrobe on double tracks top and bottom.  They are 15kgs each and 16mm thick.  Would your kit be suitable? A: Yes, the Coburn Jason 4J can take doors…

I’m currently detailing a sliding door using the Projeto 150 system and was wondering if you have the dimensions of the floor mounted guide for the timber door as it seems to be the only element not dimensioned on the pdf?

By Door Admin / 21 November 2010

The door stops for the Projeto 150 are on the track itself, not the floor, and included in the kit.  The dimensions of the floor guides are 19.8mm width x 51mm length x 17mm tall.  You mortice a groove in the bottom of the door so it runs along the floor guide.  They are 304…

I’m looking for wardrobe sliding door gear with a length of 2900mm to take three doors (MDF) running on two tracks. One door at rear with two at front. Any ideas please?

By Door Admin / 20 November 2010

As long as your individual doors are less than 25kg each in weight, then you can choose between the Coburn Jason bottom running wardrobe gear (you’d need to order 2 kits to get the length) or the Coburn Twin 60 top hung wardrobe gear (again the longest kit is 2.4m, so you’d need 2 kits…

We have an Exidor 500 series panic hardware with a red oval door bar we need replacing as the bar lever that attaches to the lock has snapped, is this spare part available?

By Door Admin / 18 November 2010

If the lever of the locking unit has broken, then the whole thing can be replaced for the price of the locking unit component.  (If it’s the slave unit, then contact us and we can quote you for a replacement part.)  The prices for coloured Exidor products (e.g. ruby red) are on each product page. …