Blog

How do I stop the door closer slamming the door?

By Door Admin / 17 November 2010

Q: (from Costa) I have a door fitted with a Geze TS4000E door closer and I dont know how to perform the final slam adjustment. The door is shutting perfectly until the last 10 degrees or so when it just lets go and slams LOUD!  I have turned down the closing force and increased the…

I am looking for a sliding folding concertina door system to fold 8 x narrow doors , 4 each way. Doors are 2200 mm x 235 mm x 35 mm in size and weigh approx. 20 kg each. I will need a system which has both top and bottom tracks – 2100 mm in length.

By Door Admin / 15 November 2010

The suitable gear for the sliding folding arrangement you describe for your doors would be the Coburn Foldaside 100, (see components listed on our web page at the link shown) a set to do all 8 doors on a 2.1m top & bottom track will have to be bought in component form, with two 4…

I have a personal access door on my steel garage, outward opening. Door size 950mm. I live on Skye and it is very windy. I need a door closer that would be strong enough to prevent the wind catching the door and damaging the hinges. Please advise, many thanks.

By Door Admin / 13 November 2010

The best door closer to use for this scenario would be the Geze TS4000, fitted on the PUSH side of the door in the figure 61 position (body on the transom with the arm on the door, see picture below).  If you have a concern about weatherproofing, we would suggest using a marine grease on…

What Fire Door rating must the door be for which I can use the Exidor Range?

By Door Admin / 9 November 2010

The Exidor range has successfully passed a fire test, which will allow the panic hardware to be used on any fire door that has been tested. It is the door which will carry the certification, as it is the door which will prevent a fire from escaping an area of a building. The Exit Hardware…

Q: Are Exidor products Fire Rated?

By Door Admin / 9 November 2010

The Exidor 200 / 300 series range of Bolts and Latches have been fire rated for use on timber and steel doors. The 400 series Touch Bars in single, two and three point units have also been tested for use on Timber and Steel Fire Doors.

What sized door will a Standard Exidor product fit?

By Door Admin / 2 November 2010

A standard Exidor 200 / 300 series unit will suit doors 1220mm wide and 2440mm high. The Exidor 400 Series Touch Bars are available in two standard sizes; up to 900mm and 1200mm wide and 2440mm high. The small unit measures 650mm and will operate within a 692mm door opening. The larger unit measures 830mm…

I have a clinical room door that requires a system or closer that enables the door to be temporarily suspended open when the room is in use, what product can I use?

By Door Admin / 30 October 2010

First of all, you need to identify if this is a fire door, as that fact will govern what kind of device you can use.  Hold open arms(opens in new tab) are available for some Geze door closers, but would be inappropriate for use on a fire door.

Does the Exidor 305 accept a single euro cylinder?

By Door Admin / 29 October 2010

Q: (from Julian) Does the Exidor 305 come with an external access device that accepts a single euro cylinder?  And can the euro cylinder be replaced? A: (from Doorstuff) The Exidor 305 mortice operator does come with a single euro cylinder, which you can replace with an other, for example a masterkeyed cylinder.  The cylinder…

How do I change the code on a digital lock?

By Door Admin / 28 October 2010

If your lock is similar to our U120, these steps may help:- (1) Remove the lock from the door.  (2) Remove the 4 retaining screws from the back of the ‘Outside Lock Body’.  Take extra care to keep the lock body on a flat surface, when you are removing the plate, because there are a…

What products can be used under the EN 1125 standard?

By Door Admin / 26 October 2010

EN 1125 covers panic hardware Push Bars and Touch Bar devices, which must be used in areas were members of the public have access, such as places of entertainment or public buildings. The standard requires these types of products to be used in areas were panic situations may occur due to users not being familiar…

Spare parts for GEZE floor springs?

By Door Admin / 26 October 2010

…Do you supply spare parts for the TS 500 floor spring door closers, as I need top plates 105 x 298mm? A: Yes, those cover plates (in Satin Stainless Steel finish) are available on the Geze floor springs page of the site.

I need to put a digital lock on a door, but can I have a different code on either side of the door?

By Door Admin / 24 October 2010

Yes.  The medium duty Lockey L2430 double sided digital lock will do that job.  The heavy duty Lockey L1150DS double sided also offers this feature.  The code can be the same on each side, or different.

Q: Do I need to use the cavity widening kit with the H30 Hideaway pocket door?

By Door Admin / 21 October 2010

A: (from Doorstuff) You only need to use it if the door is between 36 and 44mm thick.  Without the cavity widening kit, your finished wall thickness will be 115mm, however you can use the cavity widening kit to increase your finished wall thickness to 120mm whilst using a 35mm thick door (all based on…

Customer Query: Geze Floor Springs at Our Hotel

By Door Admin / 20 October 2010

Q: We have some nice old bronze Geze floor springs at our hotel. Can you still supply them like that? A: Yes, although you can also just replace the bodies, keeping your attractive aged plates (and saving a little money as well). Visit the TS500 floor spring and TS550 floor spring pages to select which…

We would like to fit concealed door closers to our back doors which regularly slam shut and consequently have cracked the external render around our door frames at our house. We are interested in the GEZE Boxer closers but would be grateful if you could advise if they are suitable for heavy wooden doors. Also can you advise if you can adjust the speed of close with these closers to provide a slow final shut to the door into the door-frame?

By Door Admin / 11 October 2010

Geze Boxers are ideal for solid wooden doors.  The version with power size 3 – 6 is suitable for doors with a leaf thickness of at least 50mm, maximum weight of 180kg and leaf width of no greater than 1400mm.  There is one for lighter, smaller doors (the version 2 – 4).  Both the closing…

Can you recommend a door closer that would shut a residential property door as quietly and controlled as possible?

By Door Admin / 10 October 2010

We recommend the Geze TS1500 as a good domestic door closer(opens in new tab), it has variable closing force in two sizes, adjustable closing speed and adjustable hydraulic latching action and so gives plenty of controllability. If you are price conscious, the Eurospec F2003 door closer at £12.75 + VAT is also a good closer,…

Is the slide bar on the L220 slide digital lock sprung loaded. In other words does it stay open when wound open or spring back shut?

By Door Admin / 9 October 2010

The slide bar is not sprung loaded, it has to be manually turned closed to re-lock the door. If you need a comparable unit to automatically relock upon closing the door, it would be the mortice latch version “Little” Lockey L235 digital lock.

We have an internal door which is apt to slam when external doors are opened. Would the Geze TS1500 door closer actually stop a door from slamming?

By Door Admin / 3 October 2010

Yes, the TS1500 will control the close, it has hydraulic adjustable closing speed, so you will be able to stop the door slamming.

Interested in your Projeto 150G sliding door kit. Could you recommend a firm to make the actual frameless glass doors?

By Door Admin / 2 October 2010

We don’t make the glass itself, we suggest you try your local glass supplier.  National companies that can supply glass made to measure would be Pilkington and Glassolutions.  We can supply a drilling diagram for the glass people.

We have a GEZE door closer fitted to one of a large complex of apartments constructed about 2002/2003. Not able to identify model. The door closes very quickly and with a bang. Would appreciate advice on how to adjust to operate better.

By Door Admin / 1 October 2010

You can identify Geze door closers by their body size if nothing else is visible; for example the body of a TS4000 is 287mm long, a TS2000 is 226mm long and a TS1500 is 177mm long.  The door “closing very quickly and with a bang” definitely doesn’t sound right, in fact it would do that…

Can you confirm the AA45 concealed door closers in silver will work for a FD30 door?

By Door Admin / 27 September 2010

Yes, these are suitable for use on an FD30 door.  Remember, the fire-containing property of a door is reliant on the whole set up of the door hardware working correctly together, so be sure to check the operation after fitting your approved door closers.