Blog

I am trying to find a sliding wardrobe system that would allow me to have sloping doors to fit in a dormer window. Either a front mounted system I could fit to a shelf within the wardrobe or a floor mounted system?

By Door Admin / 25 September 2010

The sliding door gear we would recommend for your situation is the Coburn Jason, it has wheels running on a track at the bottom and a top track to act as a guide.

When using a Rollan sliding door kit to convert a standard timber door to sliding, how best do I create the groove in the door for the standard fixed floor guide?

By Door Admin / 18 September 2010

The best tool for morticing the groove is a router – short & sweet!

A digital lock to fit a specific door?

By Door Admin / 16 September 2010

Q: (from Sharon) I have a solid pine door with a door depth of 34mm (I have measured this several times and it is definitely 34mm or maybe just slightly less) – do you stock a digital door lock that would fit this please – most of what I am finding are for 35mm upwards?…

My office front door constantly slams as visitors don’t close it by hand, they just leave it to swing back. Do you have anything that can make the door close softly but not delay the closing too much as people come in quickly and don’t check whether it’s closed behind them and I’m concerned about security but can’t stand the constant noise and damage to the door. Can you suggest a solution?

By Door Admin / 14 September 2010

A hydraulic overhead door closer with adjustable closing speed and adjustable latching action will solve your problem.  You can set the closing speed to fast, then use the latching action to give a slower firm close at the last 10° or so.  Which door closer you go for depends on all the normal considerations; door…

Would the Foldaside 100 system be OK for my doors: I want to have two doors sliding/ folding to one side, each door weighs approx 23 kg and is 600 mm wide?

By Door Admin / 11 September 2010

Yes, the Foldaside 100 would be fine.  Because your doors are at the maximum width you definitely need to use the floor guide (which is supplied in the 2 door kit).

Growing at the Double

By Door Admin / 10 September 2010

Doorstuff Ltd, the premier door hardware company in the South West, has trebled its warehouse size to accommodate increased inventory as its customer base continues its rapid growth. The locally-owned company, established in 2006, has moved into a 130 sq.m building at 7 Venture Court, Bradley Lane, Newton Abbot. Additional handling space and capacity will…

What & where to buy: Doors to suit Hideaway pocket door gear?

By Door Admin / 9 September 2010

The H30 is the pocket door gear only and you will need to supply the door itself.  Any normal timber door/glazed timber door will be suitable, as long as it’s up to 760mm wide x 2032mm tall x between 35mm and 44mm thick and 56Kgs maximum weight.  These dimensions make it a standard domestic door,…

I need a door closer for just an average door, nothing heavy duty. It’s width is 804mm (not sure if that helps). Currently, as soon as a little bit of wind gets a hold of it, it slams shut, which is very loud and annoying. I am hoping you can help me with some advice as to which one would best suit my needs.

By Door Admin / 7 September 2010

As long as you go for a hydraulic door closer with adjustable latching action, then the closing is fully controlled, and slamming can be prevented.  A good door closer for that size of door is the Eurospec T2024(opens in new tab), and if you’re price conscious you might like to know we have some special…

Q: We need to replace our outside door access on the fire door as the keys have been lost. Which is your most economic lock that would be suitable?

By Door Admin / 5 September 2010

A: The least expensive outside access device is the Exidor 298.

A lock for sliding wardrobe doors?

By Door Admin / 3 September 2010

Q: (from John) I need to lock some sliding wardrobe doors.  How can I do it? A: (from Doorstuff) The only solution we can offer is to use a 3 lever mortice sliding door lock, see that link.

A curved floor guide for curved sliding doors?

By Door Admin / 1 September 2010

Q: (from Clare) The company I work for recently installed two semi-circular “pods” or freestanding meeting rooms. The doors are sliding and are held onto the frame by the top track, but when you open and close them there is some sideways movement which makes them feel unstable.  I was therefore wondering whether the BK2…

Customer Queries: Replacing a Geze Boxer Concealed Door Closer

By Door Admin / 30 August 2010

“I’m trying to replace a concealed door closer which I believe is a Geze Boxer. The body of the one I have measures 240mm long, but on the pdf you show the length to be 286m, it’d the same on Geze’s own website, and everywhere else I’ve looked. Please help?” On the technical drawing on…

Q: Could you tell me if the AL155 door handle can be used on an exterior door or are they only suitable for internal use?

By Door Admin / 15 August 2010

A: The AL155 is probably more suitable as an internal door handle.  There is a similar one available in Stainless Steel, the S129 which has the dimpled design as well, which would be more weather resistant.

Q: I need to adjust some fire doors which are all fitted with Geze TS2000 closers, we can adjust the speed but not the latch speed, can you advise us?

By Door Admin / 13 August 2010

A: The latching adjustment for a TS2000 is set by changing the position of the arm, see this link(opens in new tab) to our web page, then scroll to the bottom and look at the Fitting pdf, it’s shown on page 2 of 6.

What are pullman catches?

By Door Admin / 11 August 2010

Q (from Rachel) We are looking for a Panic bar to suit a uPVC french door(opens in new tab).  We don’t need a handle on the outside.  The Exidor 502A-B looks like it will do the job.  What do the optional extras mean (Horizontal pullman catches & Vertical pullman catches)? A: (from Doorstuff) The pullman…

We already have Exidor push opening system on all our exterior doors, and we have a key lock on the outside, we need to replace all the locks with a push button system. Does the thicknesses of the doors matter? Can we set them to be unlocked sometimes?

By Door Admin / 9 August 2010

The CL1’s and CL2’s can be fitted to doors up to 60mm thick without modification.  The CL1 digital lock requires the code to be entered every time the door is opened from the outside.  The CL2 can operate that way, but can also be set to “passage function” which allows free access from the outside,…

I require a spare part for wardrobe sliding door. It is the wheel mechanism. Unsure about make of wardrobe as in house when we bought house, please see photo below.

By Door Admin / 7 August 2010

Thank you for the photo.  Unfortunately the wheels are not from one of our sliding systems (Geze, Coburn or Projeto).  Perhaps if you send this photo to other sliding door companies, someone will recognise them and may be able to supply spare parts.

Geze Slimdrives?

By Door Admin / 5 August 2010

Q: (from Nick) I need a Geze Slimdrive EMD F-IS double swing operator with motion detectors. A: (from Doorstuff) Although we ARE Geze distributors, we don’t currently supply automatic door operators.  Can I refer you to Geze themselves, you can phone them on 01543 443000 ask for the autos dept.  Alternatively you can email them…

Q: Would it be possible to adapt your Hideaway system to incorporate a glass door?

By Door Admin / 29 July 2010

Unfortunately there are no compatible glass clamps available for the Hideaway system.  The two alternatives you might consider are the iMpero pocket door system buying additional glass clamps (+ probably the timber jambs for glass doors), OR buying a Rollan 80G or Perlan 140G sliding door kit for glass and constructing your own cavity supports…

Do Geze pivot fittings open as far as 180°?

By Door Admin / 21 July 2010

Q: (from Mike) Please confirm that the Geze TS550 pivot fittings(opens in new tab) we have proposed for our single action pivoting doors in a BFI refurb scheme are suitable for opening to a 180 degree hold open position, along with size to weight ratio (doors are 2.7m high x 1050mm wide x 44mm thick)?…

Can you ID this photo & supply replacement cylinders?

By Door Admin / 16 July 2010

Q: (from Ted) Can you identify this lock from my photo and are replacement cylinders available?   A: (from Doorstuff) It’s an Exidor 302 EC Outside Access Device in Silver, and yes, you can purchase replacement cylinders though us.  If you have a masterkeyed suite contact us, as it may be possible to obtain a…