Blog

A fire escape door with a micro switch for an alarm?

By Door Admin / 14 July 2010

Q: (from Simon) I am the caretaker of a school.  There is a door which must be a fire escape door in a wing of the school which is seldom used.  If it is opened in any non-fire related event, then staff in the reception office need to be alerted by alarm so it can…

Do you have an agent in the Rep. of Ireland? I am interested in the Exidor panic hardware.

By Door Admin / 8 July 2010

We don’t have an agent in Ireland.  We use TNT shipping, so theoretically we can supply anywhere.  Contact us directly with your town & county, we can calculate the weight of your shipment and provide a shipping quote.

Q: Please can you confirm if you have any sliding door kits that are suitable for a kitchen. In particular I am concerned that a kitchen door is normally a fire door. Do sliding doors meet the safety/building requirements for use as a kitchen door and if so which kit should I use?

By Door Admin / 6 July 2010

A: The only fire rated sliding door gear we can offer is the iMpero pocket door fire door kit.  A “normal” (i.e. non-pocket) sliding door could not ever meet fire regulations because of the inevitable air spaces between the wall and the door.

I’m looking for a door closer for the front door of my little shop. I think something like the Geze TS1500 will be suitable. The thing that’s worrying me is that the door is directly under a thick lintel. There’s only 30mm from the top of the door to the underside of the lintel. Is this enough space to fit a TS1500?

By Door Admin / 4 July 2010

We assume that the door is inward opening and therefore the door closer will be fitted to the inside of the door (PULL side)?  Then the Geze TS1500 will be a good door closer for you if there’s enough room on the door for the body, the arm will fit comfortably on the 30mm deep transom…

I’m looking to divide up two rooms in my house. At the moment I have an opening in a studded partition wall 1375mm wide by 2055mm high. My question relates to the Hideaway pocket door system; is it possible to retro fit the system to a wall which is already completed or can it only be fitted to a frame specially built to suit the system?

By Door Admin / 4 July 2010

It is possible to retro fit a Hideaway kit by opening the stud walling on one side only, but how much work this will be will depend on what you find inside the wall in terms of the structure already there.  In terms of width you’ll need (2 x door width) + 1 inch.

I want a concealed door closer for an opening angle of 180deg. Door thickness 65mm, width 3FT, height 10FT. What product do I need?

By Door Admin / 2 July 2010

As long as this is a single action door, the only option for this door is a floor spring(opens in new tab) door closer. Read about them here(opens in new tab), or get in touch for more information.

Customer Query: Sliding Door Systems

By Door Admin / 23 June 2010

“I have built 2 wardrobes, originally I was intending to hang 2 x 444mm doors on each carcass using standard sprung hinges. Unfortunately, this would leave no space between the wardrobe and the bed, therefore I am now looking at a sliding door system. I need a system which will fulfill my dimensions and provide…

Fitting a door closer to an arched door?

By Door Admin / 15 June 2010

Q: (from John) I am a carpenter and have been asked to fit a door closer at a primary school. The door however is an arched one. I fitted some spring hinges, along with a hydraulic hinge. This worked for a short period but the hinges are not man enough. I feel a traditional overhead…

I require internal door closers for upvc doors, the profile is Kommerling Connoisseur Gold system.

By Door Admin / 13 June 2010

When choosing a door closer for a uPVC door, similar criteria apply to when choosing for a timber door; How wide is the door? What is its function? Do they open out or open in? etc.  We suggest selecting a door closer which has an optional mounting plate, especially as you have a special profile. …

I am looking for an outside access handle/system through a door fitted with panic hardware inside. This is for after hours hotel guests to come and go. I need to ensure the door is self locking after access from both sides.

By Door Admin / 11 June 2010

To do the job of locking automatically upon closing, we recommend the Exidor 305 mortice operators.  On the inside (push to escape) side of the door you have a normal push bar which comes with a lock case which is morticed into the door.  It comes with a euro profile cylinder and escutcheon as standard…

I am trying to find H086 – 85 x 76 x 3mm lift off hinges. Our doors are 35mm, would these hinges be suitable for that?

By Door Admin / 7 June 2010

The H086 Royde & Tucker hinges are available from us in BZP (Bright Zinc Plate) and also a wide range of other finishes.  35mm is the minimum door thickness which these hinges will suit.  They are handed left or right.

I work for a housing association and I am trying to source a privacy lock for an internal, wooden bi-fold bathroom door. What can you suggest?

By Door Admin / 5 June 2010

We supply a mortice bathroom lock for a sliding /folding door which is used in conjunction with a normal bathroom indicator & thumbturn.  It works by splaying out the latch bolt behind the keep.  You can buy them both on our website at the link here, just scroll to the section “Locks and bolts for…

Recommend a door closer?

By Door Admin / 3 June 2010

Q: (from Guy) I need a door closer that is hidden or discreet and that closes softly [probably hydraulic?] to fit an old georgian 4-panel door and frame.  The problem is the door is slammed it will crack shower tiles on the adjacent wall because the wall is flimsy and moves a little in my…

Do you also do sliding front doors for flats? The main door into my building is fine, but the door into my individual flat takes up a lot of the hall space when it opens! Do you sell sliding doors that would be safe and secure enough to be suitable for use as a front door, as that would help me immensely.

By Door Admin / 27 May 2010

Unfortunately neither the sliding door gear nor pocket door gear we supply would be secure enough to use on a front door – the only sliding door locks we supply are 3 lever, so your insurance company wouldn’t rate them either (should be a 5 lever BS rated minimum).  Actually we don’t think you ought…

Which door closer do I need to ensure an internal door at home closes right up shut to stop a cat getting in to the hamsters?

By Door Admin / 25 May 2010

It would be best to go for an overhead door closer with latching action (which controls the last few degrees of the closing, and is the bit you want to be sure is working right).  The lowest price one we do is the Eurospec F2003 at power size 3, which is rather strong for a…

A device to help fit AA45 door closers?

By Door Admin / 23 May 2010

I would like to order some AA45 door closers to replace the ones in my flat, but I don’t know how I will be able to fit them. When I tried to remove one of the old ones it was under great tension and I broke it whilst removing.  Do they come with some kind…

Turning a Cupboard Door into a Sliding Door

By Door Admin / 10 May 2010

Q: I have a 60cm width cupboard door in bedroom I’d like to make into a sliding door to save space. Please could you advise me if any of your sliding gear is suitable for this job? A: If the door is less than 9 kgs in weight you could use a Coburn Hush kit,…

I am thinking of getting the Hideaway pocket door system, how easy is it to install?

By Door Admin / 2 May 2010

If you would like to watch a video of the installation made by the manufacturer, you can watch it: click here.

I want to order a track for a set of double wooden interior sliding doors but I only seem to be able to find sets with enough pieces for one door. How do I get the extra hangers, floor guide etc?

By Door Admin / 29 April 2010

We assume you are looking at the Rollan or Perlan sliding door gear, and making a double sliding door set?  You’ll simply need to buy an extra door pack, listed under the components on each page.

Q: What is the best product for a recessed sliding door i.e. one that is concealed within a partition wall, I will be using a 24″ x 78″ door?

By Door Admin / 27 April 2010

A: We supply two designs of pocket door gear, the iMpero pocket door gear is the best one as far as wall reinforcement, engineering of mechanism, range of sizes, optional extras etc are concerned, and the Hideaway is the best one if you’re on a tight budget, still well made and versatile. Both can be seen…

Regarding Hush sliding door gear, is the quoted weight per door or the total of a pair?

By Door Admin / 26 April 2010

Thank you for your enquiry. The weight limit on the Coburn Hush is per door.