Tag Archives: geze

I am trying to find a device that will stop doors slamming in a breeze – fire doors in a factory that slam closed. Do you sell dampers or an approriate soft closing device?

Posted on 21st January 2011 by Editor

A good quality door closer will do that job.  Please see the link to our heavy duty door closers, and I suggest you look at the Geze TS4000 or the Geze TS2000 BC (back check stops the door slamming open … Continue reading →

Posted in door closers | Tagged , , , , , | Comments Off on I am trying to find a device that will stop doors slamming in a breeze – fire doors in a factory that slam closed. Do you sell dampers or an approriate soft closing device?

Q: (from Gwyn) I am looking for guided rail door closers for two disabled toilets and a standard toilet for a Church building.

Posted on 18th January 2011 by Editor

A: We can certainly help you choose the best door closers for those particular doors, but it might be a good idea to discuss your requirements with us to be sure of getting the best one.  Ones which might be worthy … Continue reading →

Posted in delayed action, door closers | Tagged , , , , , , , | Comments Off on Q: (from Gwyn) I am looking for guided rail door closers for two disabled toilets and a standard toilet for a Church building.

Q: Please advise which make and model of door closer would be most suitable for a regularly used internal office fire door?

Posted on 17th January 2011 by Editor

A: Depending upon the traffic experienced by this door AND the type of seals (fire & smoke, acoustic etc?) the best and most adjustable door closer for this situation is the Geze TS4000 which is rated for a million cycles.  … Continue reading →

Posted in door closers | Tagged , , , , , , , , | Comments Off on Q: Please advise which make and model of door closer would be most suitable for a regularly used internal office fire door?

I am interested in buying a set of your Rollan 40 sliding door gear or heavier but none of the doors I am looking at give the weight it is for a double internal door to divide open plan living room diner. Any idea of the weight of those ordinary pine doors?

Posted on 16th January 2011 by Editor

The weight for a solid pine door with dimensions 800 x 2100 x 33mm thick would be approximately 32 kgs, if your doors are similar in size to this, the Rollan 40 system would be the one to go for.  … Continue reading →

Posted in sliding door gear, sliding door gear timber | Tagged , , , | Comments Off on I am interested in buying a set of your Rollan 40 sliding door gear or heavier but none of the doors I am looking at give the weight it is for a double internal door to divide open plan living room diner. Any idea of the weight of those ordinary pine doors?

Q: Do you supply a door closer for a upvc door?

Posted on 14th January 2011 by Editor

A: Yes. When choosing a door closer for a uPVC door, similar criteria apply to when choosing for a timber door; how wide is the door? What is its function? Do they open out or open in? etc.  We suggest … Continue reading →

Posted in door closers | Tagged , , , , , , , | Comments Off on Q: Do you supply a door closer for a upvc door?

Does the Rollan sliding door track cause the doors to sit proud of the door frame or architrave, or do you sell spacers to bring the running gear forward?

Posted on 13th January 2011 by Editor

If you’re using double doors to part and slide alongside a wall either side of the opening, and the opening has architrave/frame protruding, the doors will have to pass that and thus will stand out further than otherwise.  The wall … Continue reading →

Posted in sliding door gear, sliding door gear timber | Tagged , , , | Comments Off on Does the Rollan sliding door track cause the doors to sit proud of the door frame or architrave, or do you sell spacers to bring the running gear forward?

We have a wardrobe with three large sliding mirror doors running on a ground level track…

Posted on 10th January 2011 by Editor

…the runners are now worn and need to be replaced. There is an aluminium trim around each door and the bottom one contains a pair of units containing the runners. The existing runners have given 25 years service and both … Continue reading →

Posted in sliding door gear | Tagged , , , | Comments Off on We have a wardrobe with three large sliding mirror doors running on a ground level track…

Q: Using Geze TS2000 door closers in the figure 66 position

Posted on 4th January 2011 by Editor

I am trying to select some door closers for my scout hut. I have exterior double doors that open outwards so need a figure 66 type as shown in your diagrams.  Does the Geze TS2000 NV + BC come with … Continue reading →

Posted in door closers | Tagged , , , , , , , , | Comments Off on Q: Using Geze TS2000 door closers in the figure 66 position

Our office is fitted with GEZE TS1500 door closers throughout…

Posted on 1st January 2011 by Editor

…on one of them the bolt (the one with ratchet-type notches around the head) which goes through the arm and into the rectangular device has broken in two. Can you supply a replacement bolt please, for what is otherwise a … Continue reading →

Posted in door closers | Tagged , , , | Comments Off on Our office is fitted with GEZE TS1500 door closers throughout…

Do you supply a 24V door hold open/closer for connection to a fire alarm that can be left open in various positions?

Posted on 29th November 2010 by Editor

Yes, we do supply a door closer which can allow a fire door to be left ajar, or open at any angle, while connected to the fire alarm system – it is called a Geze TS4000 EFS, and you can … Continue reading →

Posted in door closers | Tagged , , , , , | Comments Off on Do you supply a 24V door hold open/closer for connection to a fire alarm that can be left open in various positions?